likebutter.app/i18n/es/docusaurus-plugin-content-docs/current/build-a-box/raspberry-pi/basic-box-supplies.mdx

---
sidebar_position: 2
---
# Basic Box Supplies

A basic Butter Box setup is a Raspberry Pi Zero 2 W with a microSD card
running the Butter software, a USB stick, powered by a USB source like a
power cord, power bank or solar panel.

In most setups like this, a Butter Box can comfortably handle **4–10
connected devices at once** without slowing down. It’s possible to have
more, but performance may drop if everyone is downloading large files or
videos at the same time.

The reach for it is about **5–10 meters** indoors, depending on the
Raspberry Pi model and depending on walls and interference. Outdoors, in
open space, it can sometimes reach farther. Think of it like the range of a
home Wi-Fi router — enough to cover a classroom, a coffee shop, meeting
space, or small outdoor gathering.

## Supplies

* [ ] Raspberry Pi Zero 2W (64 Bit)
  [https://www.adafruit.com/product/5291](https://www.adafruit.com/product/5291);
  Or you can buy a kit here: [\ 
  https://www.canakit.com/raspberry-pi-zero-2-w.html](https://www.canakit.com/raspberry-pi-zero-2-w.html)
* [ ] Power outlet and power cord that accompanies the Raspberry Pi Zero 2W
  or an [alternative power supply](../power-supply)
* [ ] Micro SD Card: Images with the Butter software are usually under 16 GB
  (we suggest 256 GB). Media that people upload to the chat ends up on the
  card; it never gets cleared.
* [ ] USB drive (min 32 GB)
*   [ ] Adapters (as needed)

    * [ ] Micro USB/Male to USB A/Female
    * [ ] A dongle to connect the micro SD card to your laptop (if needed)



**Once you have your supplies, continue in the Install Butter section.**

[install-butter.md](install-butter)

<figure><img src="/img/docs/20250815_142828.jpg" alt=""/><figcaption></figcaption></figure>