Change butter site location for kanglam

LICENCE

@@ -1,56 +0,0 @@
-Copyright © 2017, Michael Stapelberg and contributors
-Copyright © 2021, guardianproject
-Copyright © 2025-2026, SR2 Communications Limited
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-
-    * Neither the name of Michael Stapelberg nor the
-      names of contributors may be used to endorse or promote products
-      derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY Michael Stapelberg ''AS IS'' AND ANY
-EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL Michael Stapelberg BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-Additionally, we include here the original licence terms as required by the terms
-of the Butter Box for Raspberry Pi project, which apply only to the code derived
-from that project:
-
-MIT License
-
-Copyright (c) 2021 guardianproject
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-

README.md

@@ -1,34 +1,5 @@
-# Butter Churn
+# Churn
 
-[![License](https://img.shields.io/badge/License-BSD_3--Clause-orange.svg)](https://opensource.org/licenses/BSD-3-Clause)
+This is work in progress. 
 
-Tool for building Butter Box disk images.
+To build a butter image, run vmdb2 --rootfs-tarball=my_image.tar.gz --output my_image.img --log my_image.log
-
-## Usage
-
-To build a butter image, run:
-
-```sh
-vmdb2 --rootfs-tarball=my_image.tar.gz --output my_image.img --log my_image.log
-```
-
-## Advanced Documentation
-
-* [Creating an upgrade content pack for the Butter Box](./docs/upgrade_pack.md)
-* [Set up DeltaChat messaging between multiple boxes](./docs/multibox.md)
-* [Extending Butter Box connectivity with WiFi HaLow and LoRa](./docs/wireless_connectivity.md)
-
-## Copyright and Licence
-
-&copy; 2017, Michael Stapelberg and contributors<br>
-&copy; 2021, guardianproject<br>
-&copy; 2025-2026, SR2 Communications Limited
-
-See [LICENCE](./LICENCE) for details of the BSD-3 clause licence.
-
-This project is a derivative work of:
-
-* [Butter Box for Raspberry Pi](https://gitlab.com/likebutter/butterbox-rpi)
-  licensed under the MIT licence.
-* [Raspberry Pi Image Specs](https://salsa.debian.org/raspi-team/image-specs)
-  licensed under the 3-clause BSD licence.

ansible/butter-base.yml

@@ -13,28 +13,28 @@
         name: "{{ butter_user }}"
         state: present
 
-    - name: Add butter user to sudo group
+    - name: Get supported interface modes
-      ansible.builtin.user:
+      command: iw list
-        name: "{{ butter_user }}"
+      register: iw_list
-        groups: sudo
+      ignore_errors: yes
-        append: true
+      when: not (is_vmdb2 | bool)
 
-    - name: Allow passwordless sudo for butter user
+    - name: Search for AP mode support
-      ansible.builtin.lineinfile:
+      set_fact:
-        path: /etc/sudoers
+        ap_mode_supported: "{{ 'AP' in iw_list.stdout }}"
-        state: present
+      when: not (is_vmdb2 | bool)
-        regexp: "^{{ butter_user }}"
+
-        line: "{{ butter_user }} ALL=(ALL) NOPASSWD:ALL"
+    - name: Show AP mode support result
-        validate: '/usr/sbin/visudo -cf %s'
+      debug:
+        msg: >
+          Wi-Fi AP mode supported: {{ ap_mode_supported }}
+      when: not (is_vmdb2 | bool)
 
     - name: Make sure /etc/resolv.conf is populated
-      ansible.builtin.lineinfile:
+      lineinfile:
         path: /etc/resolv.conf
         regexp: '^nameserver 1.1.1.1'
         line: 'nameserver 1.1.1.1'
         state: present
         insertafter: EOF
-        create: true
+        create: yes
-        owner: root
-        group: root
-        mode: '0644'

ansible/cleanup.yml

@@ -4,9 +4,11 @@
   become: true
   tasks:
     - name: Print Dendrite process info for debugging
+      become: yes
       ansible.builtin.shell: |
         echo "=== Dendrite PIDs ==="
         pgrep -u {{ butter_user }} -f dendrite || echo "No dendrite PIDs found"
+    
         echo
         echo "=== Full process tree of Dendrite ==="
         for pid in $(pgrep -u {{ butter_user }} -f dendrite); do
@@ -14,18 +16,24 @@
             pstree -p $pid || echo "pstree not available for PID $pid"
             echo
         done
+    
+        echo "=== Open files under VMDB mount ==="
+        lsof +D /tmp/tmpyu_8dsew || echo "No open files found"
+    
+        echo "=== Current working directories of processes in mount ==="
+        lsof +D /tmp/tmpyu_8dsew | awk '{print $2, $NF}' | sort | uniq
       register: dendrite_debug
       when: is_vmdb2 | bool
-      changed_when: false
 
     - name: Show debug output
-      ansible.builtin.debug:
+      debug:
         msg: "{{ dendrite_debug.stdout_lines }}"
       when: is_vmdb2 | bool
 
     - name: Kill any running Dendrite process
+      become: yes
       ansible.builtin.shell: |
-       set -o pipefail && pgrep -u {{ butter_user }} -f dendrite | xargs -r kill -9
+        pgrep -u {{ butter_user }} -f dendrite | xargs -r kill -9
       register: dendrite_cleanup
       changed_when: dendrite_cleanup.stdout != ""
       when: is_vmdb2 | bool
@@ -36,6 +44,6 @@
       when: is_vmdb2 | bool
 
     - name: Give processes time to exit
-      ansible.builtin.pause:
+      become: yes
-        seconds: 5
+      shell: sleep 5
       when: is_vmdb2 | bool

ansible/delta-chat.yml

@@ -1,33 +0,0 @@
----
-- name: Install madmail/deltachat
-  hosts: all
-  become: true
-  tasks:
-    - name: Create madmail directory
-      ansible.builtin.file:
-        path: "/home/{{ butter_user }}/madmail"
-        state: directory
-        owner: "{{ butter_user }}"
-        group: "{{ butter_user }}"
-        mode: "0755"
-
-    - name: Download pre-built madmail archive
-      ansible.builtin.get_url:
-        url: "https://github.com/themadorg/madmail/releases/download/v0.12.7/madmail-linux-{{ go_arch_map[ansible_architecture] }}.tar.gz"
-        dest: "/tmp/madmail-linux-{{ go_arch_map[ansible_architecture] }}.tar.gz"
-        mode: '0644'
-
-    - name: Untar madmail
-      ansible.builtin.unarchive:
-        src: "/tmp/madmail-linux-{{ go_arch_map[ansible_architecture] }}.tar.gz"
-        dest: "/home/{{ butter_user }}/madmail"
-        remote_src: true
-        # extra_opts: [--strip-components=1]
-
-    - name: Ensure butter_user owns madmail directory
-      ansible.builtin.file:
-        path: "/home/{{ butter_user }}/madmail"
-        state: directory
-        recurse: true
-        owner: "{{ butter_user }}"
-        group: "{{ butter_user }}"

ansible/deploy-butter-portal.yml

@@ -1,102 +0,0 @@
----
-- name: Deploy butter portal
-  hosts: all
-  become: true
-
-  tasks:
-    - name: "Ensure /tmp/butter-portal is absent"
-      ansible.builtin.file:
-        path: "/home/{{ butter_user }}/butter-portal"
-        state: absent
-
-    - name: "Clone the portal repo"
-      ansible.builtin.git:
-        repo: "https://guardianproject.dev/butter/butter-portal"
-        dest: "/home/{{ butter_user }}/butter-portal"
-        version: main
-
-    - name: Install requirements
-      ansible.builtin.pip:
-        requirements: "/home/{{ butter_user }}/butter-portal/requirements.txt"
-        virtualenv: "/home/{{ butter_user }}/portal_env"
-        virtualenv_python: python3
-
-    - name: Seed database
-      ansible.builtin.shell: |
-        echo "Starting db initialisation!"
-        source /home/{{ butter_user }}/portal_env/bin/activate
-        flask db init
-        flask db migrate
-        flask db upgrade
-        flask seed-settings
-      args:
-        chdir: "/home/{{ butter_user }}/butter-portal"
-        executable: /bin/bash
-        creates: "/home/{{ butter_user }}/butter-portal/app.db"
-      register: database_init
-
-    - name: Template portal systemd service file
-      ansible.builtin.template:
-        src: templates/butterbox-portal.service.j2
-        dest: /lib/systemd/system/butterbox-portal.service
-        owner: root
-        group: root
-        mode: '0644'
-
-    - name: Template portal change manager service file
-      ansible.builtin.template:
-        src: templates/change-manager.service.j2
-        dest: /lib/systemd/system/change-manager.service
-        owner: root
-        group: root
-        mode: '0644'
-
-    - name: Template nginx config
-      ansible.builtin.template:
-        src: templates/nginx-config.j2
-        dest: /etc/nginx/sites-available/default
-        owner: root
-        group: root
-        mode: '0644'
-
-    - name: Enable portal by symlink
-      ansible.builtin.file:
-        src: /lib/systemd/system/butterbox-portal.service
-        dest: /etc/systemd/system/multi-user.target.wants/butterbox-portal.service
-        state: link
-
-    - name: Enable change manager by symlink
-      ansible.builtin.file:
-        src: /lib/systemd/system/change-manager.service
-        dest: /etc/systemd/system/multi-user.target.wants/change-manager.service
-        state: link
-
-    - name: Ensure butter_user owns portal directory
-      ansible.builtin.file:
-        path: "/home/{{ butter_user }}/butter-portal"
-        state: directory
-        recurse: true
-        owner: "{{ butter_user }}"
-        group: "{{ butter_user }}"
-#    - name: Template portal reverse proxy config for Lighttpd
-#      ansible.builtin.get_url:
-#        src: templates/50-butter-portal-reverse-proxy.conf
-#        dest: /etc/lighttpd/conf-available/50-butter-portal-reverse-proxy.conf
-#        owner: root
-#        group: root
-#        mode: '0644'
-#
-#    - name: Ensure old symlink is removed if it exists
-#      ansible.builtin.file:
-#        path: /etc/lighttpd/conf-enabled/50-butter-portal-reverse-proxy.conf
-#        state: absent
-#        force: true
-#
-#    - name: Enable reverse proxy config for portal in Lighttpd
-#      ansible.builtin.file:
-#        src: /etc/lighttpd/conf-available/50-butter-portal-reverse-proxy.conf
-#        dest: /etc/lighttpd/conf-enabled/50-butter-portal-reverse-proxy.conf
-#        state: link
-#        force: true
-#
-    # - debug: var=database_init.stdout_lines

ansible/deploy-butter-site.yml

@@ -0,0 +1,70 @@
+---
+- name: Deploy butter site
+  hosts: all
+  become: true
+
+  tasks:
+    - name: Install unzip
+      apt:
+        name:
+          - unzip
+        state: present
+        update_cache: yes
+      when: not ( is_vmdb2 | bool )
+
+    - name: Ensure /etc/resolv.conf contains nameserver 1.1.1.1
+      copy:
+        dest: /etc/resolv.conf
+        content: "nameserver 1.1.1.1\n"
+        owner: root
+        group: root
+        mode: '0644'
+      when: is_vmdb2 | bool
+
+    - name: Ensure /tmp/butter-site is absent
+      file:
+        path: /tmp/butter-site
+        state: absent
+
+    - name: Ensure /tmp/site.zip is absent
+      file:
+        path: /tmp/site.zip
+        state: absent
+
+    - name: Download the butter-box UI zip file
+      get_url:
+        url: "https://guardianproject.dev/api/packages/butter/generic/butter-kanglam-ui/latest/kanglam-ui.tar.gz"
+        dest: /tmp/site.tar.gz
+        mode: '0644'
+       
+    - name: Ensure /tmp/butter-site directory exists
+      file:
+        path: /tmp/butter-site
+        state: directory
+        mode: '0755'
+
+    - name: Unarchive site.tar.gz to /tmp/butter-site
+      unarchive:
+        src: /tmp/site.tar.gz
+        dest: /var/www/html
+        remote_src: yes
+        extra_opts: [--strip-components=1]
+
+    - name: Set permissions for /var/www/html/
+      become: true
+      file:
+        path: /var/www/html/
+        owner: www-data
+        group: www-data
+        mode: '0755'
+        recurse: yes
+
+#    - name: List files in remote directory
+#      ansible.builtin.find:
+#        paths: /var/www/html
+#        file_type: any
+#      register: dir_contents
+#    
+#    - name: Print directory contents
+#      ansible.builtin.debug:
+#        msg: "{{ dir_contents.files | map(attribute='path') | list }}" 

ansible/group_vars/all.yml

@@ -4,6 +4,8 @@ go_version: "1.24.6"
 go_arch_map:
   x86_64: "amd64"
   aarch64: "arm64"
+script_base_url: "https://gitlab.com/likebutter/butterbox-rpi/-/raw/main/scripts"
+config_base_url: "https://gitlab.com/likebutter/butterbox-rpi/-/raw/main/configs"
 
 vmdb2_script_base_dir: "butterbox-rpi/scripts"
 vmdb2_config_base_dir: "butterbox-rpi/configs"

ansible/install-ap-optimized-firmware.yml

@@ -10,4 +10,4 @@
       register: firmware_update
       changed_when: firmware_update.rc == 0
       failed_when: firmware_update.rc != 0
-      ignore_errors: true
+      ignore_errors: yes

ansible/install-chat.yml

@@ -4,18 +4,18 @@
   become: true
   tasks:
     - name: Install deps
-      ansible.builtin.apt:
+      apt:
         name:
           - git
           - vim
           - lighttpd
           - sudo
         state: present
-        update_cache: true
+        update_cache: yes
       when: not ( is_vmdb2 | bool )
 
     - name: Create dendrite directories
-      ansible.builtin.file:
+      file:
         path: "/home/{{ butter_user }}/dendrite/bin"
         state: directory
         owner: "{{ butter_user }}"
@@ -23,72 +23,94 @@
         mode: "0755"
 
     - name: Download pre-built dendrite archive
-      ansible.builtin.get_url:
+      get_url:
         url: "https://guardianproject.dev/api/packages/butter/generic/dendrite/latest/dendrite-{{ go_arch_map[ansible_architecture] }}.tar.gz"
         dest: /tmp
         mode: '0644'
 
     - name: Untar dendrite
-      ansible.builtin.unarchive:
+      unarchive:
         src: "/tmp/dendrite-{{ go_arch_map[ansible_architecture] }}.tar.gz"
         dest: "/home/{{ butter_user }}/dendrite/bin"
-        remote_src: true
+        remote_src: yes
         extra_opts: [--strip-components=2]
 
     - name: Ensure butter_user owns Dendrite directory
-      ansible.builtin.file:
+      file:
         path: "/home/{{ butter_user }}/dendrite"
         state: directory
-        recurse: true
+        recurse: yes
 
     - name: Generate Matrix signing key
-      ansible.builtin.command: ./bin/generate-keys --private-key matrix_key.pem
+      command: ./bin/generate-keys --private-key matrix_key.pem
       args:
-        creates: "/home/{{ butter_user }}/dendrite/matrix_key.pem"
         chdir: "/home/{{ butter_user }}/dendrite"
 
     - name: Generate self-signed TLS certificate (optional)
-      ansible.builtin.command: ./bin/generate-keys --tls-cert server.crt --tls-key server.key
+      command: ./bin/generate-keys --tls-cert server.crt --tls-key server.key
       args:
         chdir: "/home/{{ butter_user }}/dendrite"
-        creates: "/home/{{ butter_user }}/dendrite/server.key"
 
     - name: Download Dendrite config to target
-      ansible.builtin.template:
+      get_url:
-        src: "templates/butterbox-dendrite.conf.j2"
+        url: "{{ config_base_url }}/butterbox-dendrite.conf"
         dest: "/home/{{ butter_user }}/dendrite/butterbox-dendrite.conf"
         owner: "{{ butter_user }}"
         group: "{{ butter_user }}"
         mode: '0644'
 
+    - name: Replace REPLACEME with butter_name in config
+      replace:
+        path: "/home/{{ butter_user }}/dendrite/butterbox-dendrite.conf"
+        regexp: 'REPLACEME'
+        replace: "{{ butter_name }}"
+
+    - name: Replace /home/pi with /home/butter_user in config
+      replace:
+        path: "/home/{{ butter_user }}/dendrite/butterbox-dendrite.conf"
+        regexp: '/pi/'
+        replace: "/{{ butter_user }}/"
+
     - name: Create log directory for Dendrite
-      ansible.builtin.file:
+      file:
         path: "/var/log/dendrite"
         state: directory
         owner: "{{ butter_user }}"
         group: "{{ butter_user }}"
         mode: '0755'
-        recurse: true
+        recurse: yes
 
-    - name: template dendrite systemd service file
+    - name: Download dendrite systemd service file
-      ansible.builtin.template:
+      get_url:
-        src: templates/butterbox-dendrite.service.j2
+        url: "{{ config_base_url }}/butterbox-dendrite.service"
         dest: /lib/systemd/system/dendrite.service
         owner: root
         group: root
         mode: '0644'
 
+    - name: Replace /home/pi with /home/butter_user in service file
+      replace:
+        path: /lib/systemd/system/dendrite.service
+        regexp: '/pi/'
+        replace: "/{{ butter_user }}/"
+
+    - name: Replace pi with butter_user in service file
+      replace:
+        path: /lib/systemd/system/dendrite.service
+        regexp: 'User=pi'
+        replace: "User={{ butter_user }}"
+
     - name: Enable dendrite by symlink
-      ansible.builtin.file:
+      file:
         src: /lib/systemd/system/dendrite.service
         dest: /etc/systemd/system/multi-user.target.wants/dendrite.service
         state: link
 
     - name: Ensure butter_user owns Dendrite directory
-      ansible.builtin.file:
+      file:
         path: "/home/{{ butter_user }}/dendrite"
         state: directory
-        recurse: true
+        recurse: yes
         owner: "{{ butter_user }}"
         group: "{{ butter_user }}"
         mode: "0755"
@@ -100,10 +122,31 @@
         name: dendrite
       when: not (is_vmdb2 | bool)
 
+    - name: Download Matrix reverse proxy config for Lighttpd
+      get_url:
+        url: "{{ config_base_url }}/50-matrix-reverse-proxy.conf"
+        dest: /etc/lighttpd/conf-available/50-matrix-reverse-proxy.conf
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Ensure old symlink is removed if it exists
+      file:
+        path: /etc/lighttpd/conf-enabled/50-matrix-reverse-proxy.conf
+        state: absent
+        force: true
+ 
+    - name: Enable reverse proxy config for Matrix in Lighttpd
+      file:
+        src: /etc/lighttpd/conf-available/50-matrix-reverse-proxy.conf
+        dest: /etc/lighttpd/conf-enabled/50-matrix-reverse-proxy.conf
+        state: link
+        force: true
+
     - name: Start dendrite as user butter_user
-      become: true
+      become: yes
       become_user: "{{ butter_user }}"
-      ansible.builtin.shell: |
+      shell: |
         nohup /home/{{ butter_user }}/dendrite/bin/dendrite \
           --config /home/{{ butter_user }}/dendrite/butterbox-dendrite.conf \
           -really-enable-open-registration \
@@ -111,10 +154,10 @@
       args:
         chdir: "/home/{{ butter_user }}"
       when: is_vmdb2 | bool
-      changed_when: false
+
 
     - name: Wait for Dendrite client API to be available
-      ansible.builtin.wait_for:
+      wait_for:
         host: "127.0.0.1"
         port: 8008
         delay: 3         # wait a few seconds before first check
@@ -123,17 +166,16 @@
       when: is_vmdb2 | bool
     
     - name: Copy public room script
-      ansible.builtin.template:
+      template:
         src: templates/create_public_room.sh.j2
         dest: "/home/{{ butter_user }}/create_public_room.sh"
         mode: '0755'
   
     - name: Run the create_public_room.sh script
-      ansible.builtin.command: "/home/{{ butter_user }}/create_public_room.sh"
+      command: "/home/{{ butter_user }}/create_public_room.sh"
       register: room_creation
       ignore_errors: false 
-      changed_when: false
     
     - name: Show room creation output
-      ansible.builtin.debug:
+      debug:
         var: room_creation.stdout

ansible/install-keanu-weblite.yml

@@ -4,21 +4,20 @@
   become: true
   tasks:
     - name: Install Node.js 22 (needed for matrix-js-sdk)
-      ansible.builtin.shell: |
+      shell: |
-        set -o pipefail curl -fsSL https://deb.nodesource.com/setup_22.x | bash -
+        curl -fsSL https://deb.nodesource.com/setup_22.x | bash -
         apt-get install -y nodejs
       args:
         executable: /bin/bash
-        creates: /bin/npm
 
     - name: Ensure previous keanu-weblite temp directory is removed
-      ansible.builtin.file:
+      file:
         path: /tmp/keanu-weblite
         state: absent
       delegate_to: localhost
 
     - name: Clone keanu-weblite repository (dev branch)
-      ansible.builtin.git:
+      git:
         repo: https://gitlab.com/keanuapp/keanuapp-weblite.git
         dest: /tmp/keanu-weblite
         version: dev
@@ -26,43 +25,51 @@
       delegate_to: localhost
 
     - name: Run npm install
-      ansible.builtin.command: npm install
+      shell: npm install
       args:
         chdir: /tmp/keanu-weblite
       delegate_to: localhost
-      changed_when: false
 
     - name: Download keanu-weblite config file
-      ansible.builtin.template:
+      get_url:
-        src: "templates/keanu-weblite-config.json.j2"
+        url: "{{ config_base_url }}/keanu-weblite-config.json"
         dest: /tmp/keanu-weblite/src/assets/config.json
         mode: '0644'
       delegate_to: localhost
 
+    - name: Replace REPLACEME with butter_name in config.json
+      replace:
+        path: /tmp/keanu-weblite/src/assets/config.json
+        regexp: 'REPLACEME'
+        replace: "{{ butter_name }}"
+      delegate_to: localhost
+
     - name: Run npm build with legacy OpenSSL option
-      ansible.builtin.shell: |
+      shell: |
         export NODE_OPTIONS=--openssl-legacy-provider
         npm run build
       args:
         chdir: /tmp/keanu-weblite
       delegate_to: localhost
-      changed_when: false
 
     - name: Copy build output to /var/www/html/chat
-      ansible.builtin.copy:
+      become: true
+      copy: 
          src:  /tmp/keanu-weblite/dist/
          dest:  /var/www/html/chat/
-        mode: '0755'
 
     - name: Set permissions for /var/www/html/chat
-      ansible.builtin.file:
+      become: true
+      file:
         path: /var/www/html/chat
         owner: www-data
         group: www-data
         mode: '0755'
-        recurse: true
+        recurse: yes
+
+    - name: Restart lighttpd service
+      ansible.builtin.systemd:
+        name: lighttpd
+        state: restarted
+      when: not (is_vmdb2 | bool)
 
-    - name: "Ensure systemd-timesyncd is disabled"
-      ansible.builtin.file:
-        path: "/etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service"
-        state: absent

ansible/install-rasp-ap.yml

@@ -9,19 +9,13 @@
     raspap_adblock: 0
 
   tasks:
-    - name: ensure lighttpd listens on port 8080
-      ansible.builtin.lineinfile:
-        path: /etc/lighttpd/lighttpd.conf
-        regexp: '^server.port'
-        line: server.port=8080
-
     - name: Check if RaspAP is already installed
       ansible.builtin.stat:
-        path: /var/www/html/raspap
+        path: /var/www/html/admin
       register: raspap_stat
 
     - name: Download RaspAP install script
-      ansible.builtin.get_url:
+      get_url:
         url: https://install.raspap.com
         dest: /tmp/raspap_install.sh
         mode: "0755"
@@ -29,7 +23,7 @@
 
     - name: Run RaspAP install script
       ansible.builtin.shell: |
-        pwd && ls -alh / && /usr/bin/bash /tmp/raspap_install.sh --yes --path /var/www/html/raspap \
+        pwd && ls -alh / && /usr/bin/bash /tmp/raspap_install.sh --yes --path /var/www/html/admin \
         --check 0 \
         --wireguard {{ raspap_wireguard }} \
         --openvpn {{ raspap_openvpn }} \
@@ -41,44 +35,45 @@
       failed_when: raspap_install.rc != 0
 
     - name: Remove /var/www/html.* directories if they exist
+      become: true
       ansible.builtin.shell: |
         find /var/www/html.* -maxdepth 0 -type d -exec rm -r {} \; || :
       changed_when: false
 
     - name: Ensure /etc/hostapd directory exists
-      ansible.builtin.file:
+      file:
         path: /etc/hostapd
         state: directory
         mode: '0755'
 
     - name: Template RaspAP network config to target
-      ansible.builtin.template:
+      template:
         src: "hostapd.conf.j2"
         dest: "/etc/hostapd/hostapd.conf"
         mode: '0644'
 
     - name: Copy hostapd set_hostapd_iface config script
-      ansible.builtin.template:
+      template:
         src: "set_hostapd_iface.py"
         dest: "/usr/local/bin/set_hostapd_iface.py"
-        mode: '0744'
+        mode: '0755'
 
-    - name: Template hostapd set_hostapd_iface service file
+    - name: Copy hostapd set_hostapd_iface service file
-      ansible.builtin.template:
+      template:
         src: "set-hostapd-iface.service.j2"
         dest: "/lib/systemd/system/set-hostapd-iface.service"
-        mode: '0644'
+        mode: '0755'
 
-    - name: Template hostapd raspapd systemd service file
+    - name: Download hostapd raspapd systemd service file
-      ansible.builtin.template:
+      get_url:
-        src: "templates/raspapd.service.j2"
+        url: "{{ config_base_url }}/raspapd.service"
         dest: "/lib/systemd/system/raspapd.service"
         owner: root
         group: root
         mode: '0644'
 
     - name: Enable service raspapd, avahi-daemon, and set_hostapd_iface by symlink
-      ansible.builtin.file:
+      file:
         src: "/lib/systemd/system/{{ item }}"
         dest: "/etc/systemd/system/multi-user.target.wants/{{ item }}"
         state: link
@@ -87,17 +82,20 @@
         - "set-hostapd-iface.service"
         - "avahi-daemon.service"
 
-    - name: Disable service raspapd restapi service
-      ansible.builtin.file:
-        path: "/etc/systemd/system/multi-user.target.wants/{{ item }}"
-        state: absent
-      with_items:
-        - "restapi.service"
-
     - name: Copy dnsmasq config
-      ansible.builtin.template:
+      template:
         src: "butterbox-dnsmasq.conf.j2"
         dest: /etc/dnsmasq.d/butterbox-dnsmasq.conf
         owner: root
         group: root
         mode: '0644'
+
+    - name: Restart service raspapd, issue daemon-reload to pick up config changes
+      ansible.builtin.systemd_service:
+        state: restarted
+        daemon_reload: true
+        name: "{{ item }}"
+      when: not (is_vmdb2 | bool)
+      with_items:
+        - raspapd
+        - set-hostapd-iface

ansible/install-usb-viewer.yml

@@ -4,16 +4,15 @@
   become: true
   tasks:
     - name: Copy systemd services
-      ansible.builtin.template:
+      copy:
-        src: "{{ item }}"
+        src: "{{ vmdb2_config_base_dir }}/{{ item }}"
         dest: "/etc/systemd/system/{{ item }}"
-        mode: '0644'
       loop:
         - udisks2-mount@.service
         - serve-usb@.service
 
     - name: Enable services by symlink
-      ansible.builtin.file:
+      file:
         src: "/etc/systemd/system/{{ item  }}"
         dest: "/etc/systemd/system/multi-user.target.wants/{{ item }}"
         state: link
@@ -21,14 +20,35 @@
         - udisks2-mount@.service
         - serve-usb@.service
 
+    - name: Copy web UI assets (remote to remote)
+      copy:
+        src: "/var/www/html/assets/{{ item.src }}"
+        dest: "/var/www/html/{{ item.dest }}"
+        remote_src: true
+      loop:
+        - { src: "css/butter-dir-listing.css", dest: "butter-dir-listing.css" }
+        - { src: "js/butter-dir-listing.js", dest: "butter-dir-listing.js" }
+
+    - name: Install Lighttpd USB config
+      copy:
+        src: "{{ vmdb2_config_base_dir }}/50-usb-butter.conf"
+        dest: "/etc/lighttpd/conf-available/50-usb-butter.conf"
+
     - name: Install udev rule
-      ansible.builtin.copy:
+      copy:
-        src: "templates/99-usb-butter.rules"
+        src: "{{ vmdb2_config_base_dir }}/99-usb-butter.rules"
         dest: "/etc/udev/rules.d/99-usb-butter.rules"
-        mode: '0644'
 
     - name: Install udev trigger script
-      ansible.builtin.template:
+      copy:
-        src: templates/on-usb-drive-mounted.sh.j2
+        src: "{{ vmdb2_script_base_dir }}/on-usb-drive-mounted.sh"
         dest: /usr/bin/on-usb-drive-mounted.sh
-        mode: '0744'
+        mode: '0755'
+
+    - name: Reload udev rules
+      command: udevadm control --reload-rules
+      when: not (is_vmdb2 | bool)
+
+    - name: Reload systemd daemon
+      command: systemctl daemon-reload
+      when: not (is_vmdb2 | bool)

ansible/main.yml

@@ -7,12 +7,10 @@
 - import_playbook: install-rasp-ap.yml
   tags: "ap"
   when:  ap_mode_supported | bool
-- import_playbook: deploy-butter-portal.yml
+- import_playbook: deploy-butter-site.yml
   tags: 
     - "website"
     - "usb"
-- import_playbook: delta-chat.yml
-  tags: "delta-chat"
 - import_playbook: install-chat.yml
   tags: "matrix"
 - import_playbook: cleanup.yml

ansible/remove-wifi-creds.yml

@@ -4,8 +4,8 @@
   become: true
   tasks:
     - name: Copy wpa_supplicant config
-      ansible.builtin.template:
+      copy:
-        src: "wpa_supplicant.conf"
+        src: "{{ vmdb2_config_base_dir }}/wpa_supplicant.conf"
         dest: /etc/wpa_supplicant/wpa_supplicant.conf
         force: true
         mode: '0644'

ansible/templates/99-usb-butter.rules

@@ -1,11 +0,0 @@
-# Using udev to mount newly attached usb drives doesn't work.
-# https://unix.stackexchange.com/a/507150/223286
-# So, we depend on udisks to mount the disk.  *Then* we want to
-# to setup the symlink.
-# We can run the script immediately because it waits for the disk
-# to be mounted.
-
-# Mount newly inserted drives, creating the directory if it doesn't exist
-ACTION=="add", KERNEL=="sd[a-z][1-9]", ENV{ID_BUS}=="usb", TAG+="systemd", ENV{SYSTEMD_WANTS}+="udisks2-mount@%k.service", ENV{SYSTEMD_WANTS}+="serve-usb@%k.service"
-
-# When the disk is `unmounted, the symlink will just point to a now-empty directory.

ansible/templates/butterbox-dendrite.conf.j2

@@ -1,380 +0,0 @@
-# This is the Dendrite configuration file.
-#
-# The configuration is split up into sections - each Dendrite component has a
-# configuration section, in addition to the "global" section which applies to
-# all components.
-#
-# At a minimum, to get started, you will need to update the settings in the
-# "global" section for your deployment, and you will need to check that the
-# database "connection_string" line in each component section is correct.
-#
-# Each component with a "database" section can accept the following formats
-# for "connection_string":
-#   SQLite:     file:filename.db
-#               file:///path/to/filename.db
-#   PostgreSQL: postgresql://user:pass@hostname/database?params=...
-#
-# SQLite is embedded into Dendrite and therefore no further prerequisites are
-# needed for the database when using SQLite mode. However, performance with
-# PostgreSQL is significantly better and recommended for multi-user deployments.
-# SQLite is typically around 20-30% slower than PostgreSQL when tested with a
-# small number of users and likely will perform worse still with a higher volume
-# of users.
-#
-# The "max_open_conns" and "max_idle_conns" settings configure the maximum
-# number of open/idle database connections. The value 0 will use the database
-# engine default, and a negative value will use unlimited connections. The
-# "conn_max_lifetime" option controls the maximum length of time a database
-# connection can be idle in seconds - a negative value is unlimited.
-
-# The version of the configuration file.
-version: 2
-
-# Global Matrix configuration. This configuration applies to all components.
-global:
-  # The domain name of this homeserver.
-  server_name: {{ butter_name }}.local
-
-  # The path to the signing private key file, used to sign requests and events.
-  # Note that this is NOT the same private key as used for TLS! To generate a
-  # signing key, use "./bin/generate-keys --private-key matrix_key.pem".
-  private_key: /home/{{ butter_user }}/dendrite/matrix_key.pem
-
-  # The paths and expiry timestamps (as a UNIX timestamp in millisecond precision)
-  # to old signing private keys that were formerly in use on this domain. These
-  # keys will not be used for federation request or event signing, but will be
-  # provided to any other homeserver that asks when trying to verify old events.
-  # old_private_keys:
-  # - private_key: old_matrix_key.pem
-  #   expired_at: 1601024554498
-
-  # How long a remote server can cache our server signing key before requesting it
-  # again. Increasing this number will reduce the number of requests made by other
-  # servers for our key but increases the period that a compromised key will be
-  # considered valid by other homeservers.
-  key_validity_period: 168h0m0s
-
-  # The server name to delegate server-server communications to, with optional port
-  # e.g. localhost:443
-  well_known_server_name: ""
-
-  # Lists of domains that the server will trust as identity servers to verify third
-  # party identifiers such as phone numbers and email addresses.
-  trusted_third_party_id_servers:
-    - matrix.org
-    - vector.im
-
-  # Disables federation. Dendrite will not be able to make any outbound HTTP requests
-  # to other servers and the federation API will not be exposed.
-  disable_federation: false
-
-  # Configures the handling of presence events.
-  presence:
-    # Whether inbound presence events are allowed, e.g. receiving presence events from other servers
-    enable_inbound: false
-    # Whether outbound presence events are allowed, e.g. sending presence events to other servers
-    enable_outbound: false
-
-  # Server notices allows server admins to send messages to all users.
-  server_notices:
-    enabled: false
-    # The server localpart to be used when sending notices, ensure this is not yet taken
-    local_part: "_server"
-    # The displayname to be used when sending notices
-    display_name: "Server alerts"
-    # The mxid of the avatar to use
-    avatar_url: ""
-    # The roomname to be used when creating messages
-    room_name: "Server Alerts"
-
-  # Configuration for NATS JetStream
-  jetstream:
-    # A list of NATS Server addresses to connect to. If none are specified, an
-    # internal NATS server will be started automatically when running Dendrite
-    # in monolith mode. It is required to specify the address of at least one
-    # NATS Server node if running in polylith mode.
-    addresses:
-    # - localhost:4222
-
-    # Keep all NATS streams in memory, rather than persisting it to the storage
-    # path below. This option is present primarily for integration testing and
-    # should not be used on a real world Dendrite deployment.
-    in_memory: false
-
-    # Persistent directory to store JetStream streams in. This directory
-    # should be preserved across Dendrite restarts.
-    storage_path: /home/{{ butter_user }}/dendrite/jetstream
-
-    # The prefix to use for stream names for this homeserver - really only
-    # useful if running more than one Dendrite on the same NATS deployment.
-    topic_prefix: Dendrite
-
-  # Configuration for Prometheus metric collection.
-  metrics:
-    # Whether or not Prometheus metrics are enabled.
-    enabled: false
-
-    # HTTP basic authentication to protect access to monitoring.
-    basic_auth:
-      username: metrics
-      password: metrics
-
-  # DNS cache options. The DNS cache may reduce the load on DNS servers
-  # if there is no local caching resolver available for use.
-  dns_cache:
-    # Whether or not the DNS cache is enabled.
-    enabled: false
-
-    # Maximum number of entries to hold in the DNS cache, and
-    # for how long those items should be considered valid in seconds.
-    cache_size: 256
-    cache_lifetime: "5m" # 5minutes; see https://pkg.go.dev/time@master#ParseDuration for more
-
-# Configuration for the Appservice API.
-app_service_api:
-  internal_api:
-    listen: http://localhost:7777 # Only used in polylith deployments
-    connect: http://localhost:7777 # Only used in polylith deployments
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/appservice.db
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-
-  # Disable the validation of TLS certificates of appservices. This is
-  # not recommended in production since it may allow appservice traffic
-  # to be sent to an unverified endpoint.
-  disable_tls_validation: false
-
-  # Appservice configuration files to load into this homeserver.
-  config_files: []
-
-# Configuration for the Client API.
-client_api:
-  internal_api:
-    listen: http://localhost:7771 # Only used in polylith deployments
-    connect: http://localhost:7771 # Only used in polylith deployments
-  external_api:
-    listen: http://[::]:8071
-
-  # Prevents new users from being able to register on this homeserver, except when
-  # using the registration shared secret below.
-  registration_disabled: false
-
-  # Prevents new guest accounts from being created. Guest registration is also
-  # disabled implicitly by setting 'registration_disabled' above.
-  guests_disabled: true
-
-  # If set, allows registration by anyone who knows the shared secret, regardless of
-  # whether registration is otherwise disabled.
-  registration_shared_secret: ""
-
-  # Whether to require reCAPTCHA for registration.
-  enable_registration_captcha: false
-
-  # Settings for ReCAPTCHA.
-  recaptcha_public_key: ""
-  recaptcha_private_key: ""
-  recaptcha_bypass_secret: ""
-  recaptcha_siteverify_api: ""
-
-  # TURN server information that this homeserver should send to clients.
-  turn:
-    turn_user_lifetime: ""
-    turn_uris: []
-    turn_shared_secret: ""
-    turn_username: ""
-    turn_password: ""
-
-  # Settings for rate-limited endpoints. Rate limiting will kick in after the
-  # threshold number of "slots" have been taken by requests from a specific
-  # host. Each "slot" will be released after the cooloff time in milliseconds.
-  rate_limiting:
-    enabled: true
-    threshold: 5
-    cooloff_ms: 500
-
-# Configuration for the Federation API.
-federation_api:
-  internal_api:
-    listen: http://localhost:7772 # Only used in polylith deployments
-    connect: http://localhost:7772 # Only used in polylith deployments
-  external_api:
-    listen: http://[::]:8072
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/federationapi.db
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-
-  # How many times we will try to resend a failed transaction to a specific server. The
-  # backoff is 2**x seconds, so 1 = 2 seconds, 2 = 4 seconds, 3 = 8 seconds etc.
-  send_max_retries: 16
-
-  # Disable the validation of TLS certificates of remote federated homeservers. Do not
-  # enable this option in production as it presents a security risk!
-  disable_tls_validation: false
-
-  # Perspective keyservers to use as a backup when direct key fetches fail. This may
-  # be required to satisfy key requests for servers that are no longer online when
-  # joining some rooms.
-  key_perspectives:
-    - server_name: matrix.org
-      keys:
-        - key_id: ed25519:auto
-          public_key: Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw
-        - key_id: ed25519:a_RXGa
-          public_key: l8Hft5qXKn1vfHrg3p4+W8gELQVo8N13JkluMfmn2sQ
-
-  # This option will control whether Dendrite will prefer to look up keys directly
-  # or whether it should try perspective servers first, using direct fetches as a
-  # last resort.
-  prefer_direct_fetch: false
-
-# Configuration for the Key Server (for end-to-end encryption).
-key_server:
-  internal_api:
-    listen: http://localhost:7779 # Only used in polylith deployments
-    connect: http://localhost:7779 # Only used in polylith deployments
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/keyserver.db
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-
-# Configuration for the Media API.
-media_api:
-  internal_api:
-    listen: http://localhost:7774 # Only used in polylith deployments
-    connect: http://localhost:7774 # Only used in polylith deployments
-  external_api:
-    listen: http://[::]:8074
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/mediaapi.db
-    max_open_conns: 5
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-
-  # Storage path for uploaded media. May be relative or absolute.
-  base_path: /home/{{ butter_user }}/dendrite/media_store
-
-  # The maximum allowed file size (in bytes) for media uploads to this homeserver
-  # (0 = unlimited). If using a reverse proxy, ensure it allows requests at
-  # least this large (e.g. client_max_body_size in nginx.)
-  # 1GB = 1 048 576 000 (1024*1024*1000)
-  max_file_size_bytes: 1048576000
-
-  # Whether to dynamically generate thumbnails if needed.
-  dynamic_thumbnails: true
-
-  # The maximum number of simultaneous thumbnail generators to run.
-  max_thumbnail_generators: 10
-
-  # A list of thumbnail sizes to be generated for media content.
-  thumbnail_sizes:
-    - width: 32
-      height: 32
-      method: crop
-    - width: 96
-      height: 96
-      method: crop
-    - width: 640
-      height: 480
-      method: scale
-
-# Configuration for experimental MSC's
-mscs:
-  # A list of enabled MSC's
-  # Currently valid values are:
-  # - msc2836    (Threading, see https://github.com/matrix-org/matrix-doc/pull/2836)
-  # - msc2946    (Spaces Summary, see https://github.com/matrix-org/matrix-doc/pull/2946)
-  mscs: []
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/mscs.db
-    max_open_conns: 5
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-
-# Configuration for the Room Server.
-room_server:
-  internal_api:
-    listen: http://localhost:7770 # Only used in polylith deployments
-    connect: http://localhost:7770 # Only used in polylith deployments
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/roomserver.db
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-
-# Configuration for the Sync API.
-sync_api:
-  internal_api:
-    listen: http://localhost:7773 # Only used in polylith deployments
-    connect: http://localhost:7773 # Only used in polylith deployments
-  external_api:
-    listen: http://[::]:8073
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/syncapi.db
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-
-  # This option controls which HTTP header to inspect to find the real remote IP
-  # address of the client. This is likely required if Dendrite is running behind
-  # a reverse proxy server.
-  # real_ip_header: X-Real-IP
-
-# Configuration for the User API.
-user_api:
-  # The cost when hashing passwords on registration/login. Default: 10. Min: 4, Max: 31
-  # See https://pkg.go.dev/golang.org/x/crypto/bcrypt for more information.
-  # Setting this lower makes registration/login consume less CPU resources at the cost of security
-  # should the database be compromised. Setting this higher makes registration/login consume more
-  # CPU resources but makes it harder to brute force password hashes.
-  # This value can be low if performing tests or on embedded Dendrite instances (e.g WASM builds)
-  # bcrypt_cost: 10
-  internal_api:
-    listen: http://localhost:7781 # Only used in polylith deployments
-    connect: http://localhost:7781 # Only used in polylith deployments
-  account_database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/userapi_accounts.db
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-  # The length of time that a token issued for a relying party from
-  # /_matrix/client/r0/user/{userId}/openid/request_token endpoint
-  # is considered to be valid in milliseconds.
-  # The default lifetime is 3600000ms (60 minutes).
-  # openid_token_lifetime_ms: 3600000
-
-# Configuration for Opentracing.
-# See https://github.com/matrix-org/dendrite/tree/master/docs/tracing for information on
-# how this works and how to set it up.
-tracing:
-  enabled: false
-  jaeger:
-    serviceName: ""
-    disabled: false
-    rpc_metrics: false
-    tags: []
-    sampler: null
-    reporter: null
-    headers: null
-    baggage_restrictions: null
-    throttler: null
-
-# Logging configuration
-logging:
-  - type: std
-    level: info
-  - type: file
-    # The logging level, must be one of debug, info, warn, error, fatal, panic.
-    level: info
-    params:
-      path: /var/log/dendrite/
-
-
-# Not part of the dendrite-sample file, but required by 0.13.7
-relay_api:
-  database:
-    connection_string: file:///home/{{ butter_user }}/dendrite/relay_api.db

ansible/templates/butterbox-dendrite.service.j2

@@ -1,14 +0,0 @@
-[Unit]
-Description=Dendrite Service
-After=network.target
-StartLimitIntervalSec=0
-
-[Service]
-Type=simple
-Restart=always
-RestartSec=1
-User={{ butter_user }}
-ExecStart=/home/{{ butter_user }}/dendrite/bin/dendrite --config /home/{{ butter_user }}/dendrite/butterbox-dendrite.conf -really-enable-open-registration
-
-[Install]
-WantedBy=multi-user.target

ansible/templates/butterbox-dnsmasq.conf.j2

@@ -1,4 +1,4 @@
 interface=wlan0
 dhcp-range=10.3.141.50,10.3.141.255,255.255.255.0,12h
 dhcp-option=6,10.3.141.1
-address=/{{ butter_name }}.local/10.3.141.1
+address=/{{ butter_name }}.lan/10.3.141.1

ansible/templates/butterbox-portal.service.j2

@@ -1,14 +0,0 @@
-[Unit]
-Description=Portal Service
-After=network.target
-StartLimitIntervalSec=0
-
-[Service]
-Type=simple
-Restart=always
-RestartSec=1
-User={{ butter_user }}
-ExecStart=/bin/bash -c 'source /home/{{ butter_user }}/portal_env/bin/activate && cd /home/{{ butter_user }}/butter-portal && flask --app butter-portal.py run'
-
-[Install]
-WantedBy=multi-user.target

ansible/templates/change-manager.service.j2

@@ -1,15 +0,0 @@
-[Unit]
-Description=Butterbox setting management service
-After=network.target
-StartLimitIntervalSec=0
-
-[Service]
-Type=simple
-Restart=on-failure
-RestartSec=1
-User=root
-ExecStart=/bin/bash -c "chmod 600 /etc/ssh/*key && python3 change_manager.py"
-WorkingDirectory=/home/{{ butter_user }}/butter-portal
-Environment=PYTHONUNBUFFERED=1
-[Install]
-WantedBy=multi-user.target

ansible/templates/hostapd.conf.j2

@@ -7,7 +7,7 @@ beacon_int=100
 ssid={{ butter_name }}
 channel=1
 hw_mode=g
-ieee80211ac=1
+ieee80211n=0
 interface=wlan0
 wpa=none
 wpa_pairwise=CCMP

ansible/templates/keanu-weblite-config.json.j2

@@ -1,10 +0,0 @@
-{
-    "appName": "Keanu on Butter Box",
-    "appNames": {},
-    "productLink": "{{ butter_name }}.local",
-    "defaultServer": "http://{{ butter_name }}.local",
-    "rtl": false,
-    "analytics": {
-        "enabled": false
-    }
-}

ansible/templates/nginx-config.j2

@@ -1,23 +0,0 @@
-server {
-        listen 80 default_server;
-        listen [::]:80 default_server;
-        server_name {{ butter_name }}.local;
-        client_max_body_size 150M;
-
-        location ^~ /chat {
-                           alias /var/www/html/chat;
-                          }
-
-        location ^~ /raspap {
-                           proxy_pass http://127.0.0.1:8080;
-                          }
-
-        location ^~ /_matrix {
-                           proxy_pass http://127.0.0.1:8008;
-                          }
-
-        location / {
-                    proxy_pass http://127.0.0.1:5000;
-                   }
-
-        }

ansible/templates/on-usb-drive-mounted.sh.j2

@@ -1,48 +0,0 @@
-#!/bin/bash
-
-# Run by udev when a USB drive is inserted
-# usage: /usr/bin/on-usb-drive-mounted.sh /media/%k
-
-# If the drive inserted contains a directory named "butter",
-# symlink it to /media/usb-butter
-device="$1"
-
-# The device might not be mounted yet, so wait for it.
-usb_mount_path=""
-for ((i=0; i<10; i++)); do
-    usb_mount_path=$(findmnt -n -o TARGET --source "$device")
-    if [ -n "$usb_mount_path" ]; then
-        break
-    fi
-    sleep 1
-done
-
-# findmnt will briefly return 1, so don't set e until we're done with it.
-set -e
-
-if [ -z "$usb_mount_path" ]; then
-    echo "Device $device is not mounted"
-    exit 1
-else
-    echo "Device $device mounted to: $usb_mount_path"
-fi
-
-butter_dir="$usb_mount_path"
-served_dir="/media/usb-butter"
-
-# make directory butter_dir world readable
-sudo chmod -R a+rx "$butter_dir"
-sudo chmod -R a+rx "/media/root/"
-
-if [ -d "$butter_dir" ]; then
-    # Delete served_dir if it exists
-    if [ -L "$served_dir" ]; then
-        sudo rm "$served_dir"
-    fi
-    echo "Linking $butter_dir to $served_dir"
-    ln -sf "$butter_dir" "$served_dir"
-    sudo chown -R {{ butter_user }}:{{ butter_user }} $served_dir
-else
-    echo "No butter directory $butter_dir found on $device"
-    exit 1
-fi

ansible/templates/raspapd.service.j2

@@ -1,15 +0,0 @@
-[Unit]
-Description=RaspAP Service Daemon
-DefaultDependencies=no
-# This line, which the default raspapd.service would use, results in a circular dependency
-# And the symptom we see is that it doesn't boot.  Instead, run this after network.target
-# After=multi-user.target
-After=network.target
-
-[Service]
-Type=oneshot
-ExecStart=/bin/bash /etc/raspap/hostapd/servicestart.sh --interface uap0 --seconds 3
-RemainAfterExit=no
-
-[Install]
-WantedBy=multi-user.target

ansible/templates/serve-usb@.service

@@ -1,8 +0,0 @@
-[Unit]
-Description=Serve USB content
-BindTo=dev-%i.device
-
-[Service]
-ExecStart=/bin/sh -c '/usr/bin/on-usb-drive-mounted.sh /dev/%i'
-ExecStop=/bin/sh -c 'rm /media/usb-butter/'
-RemainAfterExit=yes

ansible/templates/udisks2-mount@.service

@@ -1,8 +0,0 @@
-[Unit]
-Description=Mount service
-BindTo=dev-%i.device
-
-[Service]
-ExecStart=/bin/sh -c '/usr/bin/udisksctl mount -b /dev/%i'
-ExecStop=/bin/sh -c '/usr/bin/udisksctl unmount -b /dev/%i'
-RemainAfterExit=yes

ansible/templates/wpa_supplicant.conf

@@ -1,3 +0,0 @@
-country=US
-ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
-ap_scan=1

docs/multibox.md

@@ -1,53 +0,0 @@
-## Multi-box Delta Chat setup
-
-This document details the requirements and setup needed to allow exchanging messages between Delta Chat instances
-running on different boxes connected together over LAN.
-This requires a few configuration changes.
-
-## Requirements
-
-- A way to access the boxes via console, either by using a keyboard and monitor, or by enabling
-the SSH setting through the admin portal and connecting via SSH.
-- The boxes must be configured with different hostnames, e.g., butterbox.local and jambox.local.
-The hostname can only be changed at the time of the initial admin setup for a box.
-- The boxes must be connected together in the same LAN, either by being plugged into the same router, or
-by reconfiguring one of them to be a client of the hotspot provided by the other.
-- The rest of the instructions assume the router provides the boxes with IP addresses via DHCP.
-
-## MDNS Setup
-- After making sure the boxes are on the same network, check they can resolve each other's local names,
-by running an MDNS lookup command (`avahi-resolve -n -4 <name.local>`) on one of the boxes for the hostname of the others. The following 
-example shows the address of `jambox.local` being resolved on the console of the box named `butterbox.local`:
-```
-root@butterbox:~# avahi-resolve -n -4 jambox.local
-
-jambox.local	192.168.1.2
-```
-
-- If the above does not work, it could be due to a variety of reasons, the most likely being that the
-router used to connect the boxes does not support forwarding MDNS queries. 
-In this case, run the command `ip a` to find the local `eth0` address for each box, and then add 
-that into the `/etc/hosts` file on the other boxes. This will allow them to find each other by hostname. 
-For example, if `jambox.local` had an address of `192.168.1.2`, you would need to add the following
-line to `/etc/hosts` on `butterbox.local`:
-
-```192.168.1.2     jambox.local```
-
-- In this example, the corresponding config change would also need to be made for any other connected boxes, e.g., jambox.local's `/etc/hosts` file.
-
-## Nginx setup
-- Edit the `/etc/nginx/sites-enabled/default` file to add an entry for `/mxdeliv` that points to
-localhost, port 8081, on all boxes participating in the setup:
-
-```angular2html
-
-        location /mxdeliv {
-                    proxy_pass http://127.0.0.1:8081;
-                   }
-```
-
-## Testing
-
-With the changes above, each box should be able to find the other boxes for mail delivery,
-with incoming mail routed by `nginx` to the `madmail` service.
-To test, create Delta Chat accounts on each box, and send test messages between them.

docs/upgrade_pack.md

@@ -1,57 +0,0 @@
-# Creating an upgrade content pack for the butterbox
-
-Butterboxes run [Debian OS](https://www.debian.org/) and can be upgraded using `apt update` and `apt upgrade` commands.
-However, since they are often expected to operate in areas without Internet connectivity,
-the following instructions detail how to create and use a content pack to allow local offline upgrades.
-
-## Requirements
-- A large (min 250GB ) Hard drive or USB Stick, formatted as FAT32 or ext4
-- Internet connectivity
-- A computer running Debian
-
-## Creating a Debian mirror
-
-- Plug in and mount the hard drive into a computer running Debian. The rest of the configuration assumes this is mounted at `/mnt`.
-- Edit the Debian mirror configuration. For this, depending on what kind of butterbox you have (AMD64-based, like an old laptop, or 
-ARM-based, like a Raspberry Pi), edit the file "/etc/apt/mirror.list" (you may wish to back it up beforehand) 
-to contain the following, making sure to uncomment the line corresponding to your box. 
-```angular2html
-############# config ##################
-#
- set base_path    /mnt # This is where the mirror will be created, ensure it corresponds to where the hard drive is mounted
-#
- set mirror_path  $base_path/mirror
- set skel_path    $base_path/skel
- set var_path     $base_path/var
- set cleanscript $var_path/clean.sh
- set postmirror_script $var_path/postmirror.sh
- set run_postmirror 0
-set nthreads     20
-set _tilde 0
-#
-############# end config ##############
-
-#deb [arch=arm64] http://ftp.us.debian.org/debian stable main contrib non-free # Uncomment for ARM64, e.g. Raspberry Pi 3 or 4
-#deb [arch=amd64] http://ftp.us.debian.org/debian stable main contrib non-free # Uncomment for AMD64
-
-# Note the mirror location, ftp.us.debian.org; you can choose any other online debian mirror to download from, keep a note of its name
-```
-
-- Run the command `apt-mirror`. This will create a Debian mirror on your hard drive, that can then be used to upgrade your butterbox.
-The size of the archive varies, but will utilise somewhere in the region of 150-200GB, depending on architecture.
-
-
-> Careful running this command on any metered connection, as it will attempt download hundreds of GB worth of data!
-
-> Be patient. This command will take a while to run depending on the speed of your Internet connection.
-
-## Updating your Butterbox
-
-- Plug in the hard drive into your butterbox, and mount it. This assumes it is mounted at `/mnt`.
-- Log in via the butterbox console, as the root user.
-- ensure the date is set correctly by running date, for example: `date -s "30/12/2026 10:29"`
-- edit file `/etc/apt/sources.list` to contain the following line: 
-` deb file:/mnt/mirror/ftp.us.debian.org/debian stable main contrib non-free`
-
-Note that the name of the directory might vary depending on the mirror you used in the previous step.
-- Congrats! Now you can run `apt update` and `apt upgrade` to update the box.

docs/wireless_connectivity.md

@@ -1,129 +0,0 @@
-# Extending ButterBox connectivity with WiFi HaLow and LoRa
-
-*This documentation is entirely based upon the original blog post ["Butter Box Connectivity"](https://www.sr2.uk/posts/2026-butter-box-connectivity).*
- 
-ButterBoxes are designed to operate in areas with limited or no Internet connectivity. In some
-deployments, it is useful to extend the range over which boxes can communicate with each other,
-or over which client devices can reach a box, beyond what conventional WiFi allows. This document
-describes two long-range wireless options that have been evaluated for use with the ButterBox,
- **WiFi HaLow** (IEEE 802.11ah) and **LoRa**, and explains how to set each one up as a bridge in front of a box.
-
-Both approaches let you keep the ButterBox itself unchanged: the long-range radio acts as a
-transparent link between the box and the remote client (or another box), so the existing portal,
-Delta Chat relay, and update mechanisms continue to work as normal.
-
-## Choosing between HaLow and LoRa
-
-| | WiFi HaLow | LoRa |
-| --- | --- | --- |
-| Typical range | ~400 m (modeled), usable up to ~500 m | Greater than HaLow |
-| Throughput | Up to ~8.9 Mbps (Region 1/3), ~43 Mbps (Region 2); often much lower in practice | ~2680 bits per second |
-| Cost per node | ~£155 (Morse Micro evaluation kit) | ~£26 (USR-LG206-P RS232 bridge) |
-| Good for | Portal access, multi-box networks, software updates | Very low bandwidth messaging, store-and-forward |
-
-In short: pick **HaLow** if you need clients to reach the ButterBox portal or to push updates
-between boxes at reasonable speeds. Pick **LoRa** if you only need to move very small amounts
-of data over a longer distance, and you are prepared to use protocols designed for slow,
-high-latency links.
-
-> WiFi HaLow operates in sub-1GHz ISM bands. The exact frequency allocation depends on your
-> region: 863–870 MHz in ITU Regions 1 and 3, and 902–928 MHz in Region 2. Make sure
-> the hardware you buy is approved for use where you intend to deploy it.
-
-## Option 1: WiFi HaLow bridge
-
-This setup uses a pair of Morse Micro HaLow evaluation kits to create a long-range bridge in
-front of the ButterBox. Conventional WiFi clients connect to the mobile end of the bridge and
-reach the box transparently over HaLow.
-
-### Requirements
-
-- 2 × Morse Micro **MM8108-EKH19** evaluation kits (available from Mouser Electronics,
-  approximately £155 each).
-- A ButterBox running the standard image, with its portal and Delta Chat relay configured.
-- A power source for the mobile end of the bridge - a USB powerbank is sufficient.
-- Antennas appropriate for the band allowed in your region.
-
-### Setup
-
-1. Place the first HaLow kit alongside the ButterBox and connect it to the box's LAN port.
-   This unit acts as the **stationary bridge** at the box's location.
-2. Configure the second HaLow kit as the **mobile bridge**. Power it from a powerbank so it
-   can be carried or positioned away from the box.
-3. Both kits must be configured to use the same HaLow channel within the band approved for
-   your region (863–870 MHz or 902–928 MHz). Refer to the Morse Micro evaluation
-   kit documentation for the exact channel selection commands.
-4. The mobile bridge exposes a conventional 2.4 GHz WiFi network. Client devices (phones,
-   laptops) join this network in the normal way; their traffic is then relayed over HaLow to
-   the stationary bridge and on to the ButterBox.
-5. Because the bridge is transparent at the IP layer, no changes are needed on the ButterBox
-   itself. Clients reach the portal at the usual `butterbox.local` address.
-
-### Notes on performance
-
-- Coverage modelling suggests reliable operation out to roughly 400 metres, and the ButterBox
-  portal remained reachable in tests at around 500 metres.
-- Link speed is volatile: even within 50 metres, throughput can drop to around 0.3 Mbps before
-  recovering. Expect the portal to feel slower than over conventional WiFi.
-- HaLow operates in an ISM band and must implement "listen before send". Heavily congested
-  environments will reduce effective throughput further.
-- For multi-box deployments (for example, several ButterBoxes across a school, refugee camp,
-  or evacuation centre) HaLow has enough bandwidth to also push updates between boxes. 
-  See [upgrade_pack.md](upgrade_pack.md) for the offline upgrade workflow this complements.
-
-## Option 2: LoRa serial bridge
-
-LoRa offers significantly greater range than HaLow but at a fraction of the throughput. It is
-not suitable for portal access, but can be used for very low bandwidth messaging or
-store-and-forward style workflows between boxes.
-
-### Requirements
-
-- 2 × **USR-LG206-P** RS232-to-LoRa bridges (available from AliExpress, approximately
-  £26 each).
-- A USB-to-RS232 adapter for each ButterBox the bridge is attached to, unless the box already
-  has a serial port.
-- Antennas appropriate for the band approved in your region (typically 868 MHz or 915 MHz; the
-  433 MHz band is also available in some regions but overlaps with amateur radio allocations).
-
-### Setup
-
-1. Connect a USR-LG206-P to each ButterBox you want to link, using the USB-to-RS232 adapter.
-2. Configure both LoRa bridges with matching frequency, spreading factor, and network ID
-   settings. The factory defaults will work for a point-to-point link, but the frequency must
-   be set to a band approved in your region.
-3. The bridge presents itself as a serial device on the ButterBox (typically `/dev/ttyUSB0`).
-   Any application that can speak over a serial link can now exchange data between the two
-   boxes.
-4. For practical use, layer a protocol designed for slow, high-latency links on top of the
-   serial connection. A reasonable starting point is **UUCP**, which is packaged in the Debian
-   repositories the ButterBox already uses and is well suited to store-and-forward delivery
-   over unreliable links.
-
-### Notes on performance
-
-- The advertised throughput of the USR-LG206-P is **2680 bits per second** ... bits, not
-  kilobits. Plan accordingly: this is enough for small text messages and metadata, but not for
-  interactive use of the portal.
-- LoRa's physical layer is a proprietary Semtech standard. There is currently no fully open
-  source implementation of the radio itself, although the application protocols you run over
-  it can be open.
-- Because the link is so slow, generic IP-over-serial approaches will be unsatisfactory.
-  Protocols specifically designed for constrained links (for example tinySSB, which uses
-  aggressive compression and small packet sizes) are a better fit if UUCP does not meet your
-  needs.
-
-## Testing
-
-Once a bridge is in place, the simplest end-to-end test is the same one used in the
-[multi-box Delta Chat setup](multibox.md): create a Delta Chat account on each ButterBox and
-exchange a test message. If the message is delivered, the link is working at the application
-layer.
-
-For HaLow setups, you can additionally browse to the ButterBox admin portal from a client
-device connected to the mobile bridge, and confirm that pages load (slowly is fine).
-
-For LoRa setups, do not expect the portal to be usable. Instead, verify the serial link with
-a tool such as `minicom` or `screen` on each box, then test your chosen application protocol
-(for example UUCP) by queueing a small file for delivery in one direction and confirming it
-arrives at the other end.

vmdb2-recipes/amd64_trixie.yaml

@@ -1,191 +0,0 @@
----
-# See https://wiki.debian.org/RaspberryPi3 for known issues and more details.
-# image.yml based on revision: ff7fdbf (Switch from qemu-debootstrap to debootstrap., 2024-01-01)
-
-steps:
-  - mkimg: "{{ output }}"
-    size: 3100M
-
-  - mklabel: gpt
-    device: "{{ output }}"
-
-############ efi
-  - mkpart: primary
-    fs-type: 'fat32'
-    device: "{{ output }}"
-    start: 1MiB
-    end: 132MiB
-    tag: efi
-
-  - set_part_flag: "{{ output }}"
-    tag: efi
-    flag: boot
-    state: enabled
-
-  - set_part_flag: "{{ output }}"
-    tag: efi
-    flag: esp
-    state: enabled
-
-############ bios grub
-  - mkpart: primary
-    device: "{{ output }}"
-    start: 132MiB
-    end: 133MiB
-    tag: bios_grub
-
-  - set_part_flag: "{{ output }}"
-    tag: bios_grub
-    flag: bios_grub
-    state: enabled
-############ live
-  - mkpart: primary
-    device: "{{ output }}"
-    start: 133MiB
-    end: 100%
-    tag: tag-root
-
-  - set_part_flag: "{{ output }}"
-    tag: tag-root
-    flag: legacy_boot
-    state: enabled
-
-  - kpartx: "{{ output }}"
-
-  - mkfs: vfat
-    partition: efi
-    label: EFI
-    options: -F32
-
-  - mkfs: ext4
-    partition: tag-root
-    label: boot
-
-  - mount: tag-root
-
-  - shell: |
-      dd bs=440 count=1 conv=notrunc if=/usr/lib/syslinux/mbr/gptmbr.bin of="{{ output }}"
-    root-fs: tag-root
-
-  - unpack-rootfs: tag-root
-
-  - debootstrap: trixie
-    require_empty_target: false
-    mirror: http://deb.debian.org/debian
-    target: tag-root
-    components:
-      - main
-      - non-free-firmware
-      - non-free
-    unless: rootfs_unpacked
-
-  - create-file: /etc/apt/sources.list
-    contents: |+
-      deb http://deb.debian.org/debian trixie main non-free-firmware non-free
-      deb http://deb.debian.org/debian trixie-updates main non-free-firmware non-free
-      deb http://security.debian.org/debian-security trixie-security main non-free-firmware non-free
-
-    unless: rootfs_unpacked
-
-  - apt: install
-    packages:
-      - avahi-daemon
-      - avahi-utils
-      - locales
-      - curl
-      - udisks2
-      - wget
-      - dhcpcd
-      - python3
-      - python3-packaging
-      - python3-virtualenv
-      - nginx
-      - lighttpd
-      - unzip
-      - sudo
-      - systemd-timesyncd
-      - ca-certificates
-      - dosfstools
-      - iw
-      - parted
-      - ssh
-      - wpasupplicant
-      - systemd
-      - systemd-sysv
-      - init-system-helpers 
-      - syslinux
-      - linux-image-amd64
-      - git
-    tag: tag-root
-    unless: rootfs_unpacked
-
-  - cache-rootfs: tag-root
-    unless: rootfs_unpacked
-
-  - shell: |
-
-      echo "butterbox" > "${ROOT?}/etc/hostname"
-
-      # Allow root logins locally with no password
-      sed -i 's,root:[^:]*:,root::,' "${ROOT?}/etc/shadow"
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/fstab "${ROOT?}/etc/fstab"
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/network/interfaces.d/eth0 "${ROOT?}/etc/network/interfaces.d/eth0"
-      install -m 600 -o root -g root image-specs/rootfs/etc/network/interfaces.d/wlan0 "${ROOT?}/etc/network/interfaces.d/wlan0"
-    root-fs: tag-root
-
-  # Clean up archive cache (likely not useful) and lists (likely outdated) to
-  # reduce image size by several hundred megabytes.
-  - chroot: tag-root
-    shell: |
-      apt-get clean
-      rm -rf /var/lib/apt/lists
-
-  - grub: bios
-    tag: tag-root
-    console: serial
-#
-  - grub: uefi
-    tag: tag-root
-    efi: efi
-    console: serial
-    
-  - shell: |
-      rm "${ROOT?}/etc/resolv.conf"
-      mkdir -p "${ROOT?}/etc/systemd/system/multi-user.target.requires/"
-      install -m 644 -o root -g root image-specs/rootfs/etc/systemd/system/rpi-generate-ssh-host-keys.service "${ROOT?}/etc/systemd/system/"
-      ln -s "${ROOT?}/etc/systemd/system/rpi-generate-ssh-host-keys.service" "${ROOT?}/etc/systemd/system/multi-user.target.requires/rpi-generate-ssh-host-keys.service"
-      rm -f "${ROOT?}"/etc/ssh/ssh_host_*_key*
-    root-fs: tag-root
-
-  # Clear /etc/machine-id and /var/lib/dbus/machine-id, as both should
-  # be auto-generated upon first boot. From the manpage
-  # (machine-id(5)):
-  #
-  #   For normal operating system installations, where a custom image is
-  #   created for a specific machine, /etc/machine-id should be
-  #   populated during installation.
-  #
-  # Note this will also trigger ConditionFirstBoot=yes for systemd.
-  # On Buster, /etc/machine-id should be an emtpy file, not an absent file
-  # On Bullseye, /etc/machine-id should not exist in an image
-  #
-
-  - chroot: tag-root
-    shell: |
-      rm -f /etc/machine-id /var/lib/dbus/machine-id
-      echo "uninitialized" > /etc/machine-id
-      echo "LABEL=BOOT / ext4 rw 0 1" > /etc/fstab
-
-  - virtual-filesystems: tag-root
-
-  - ansible: tag-root
-    playbook: ../ansible/main.yml
-    config_file: ../ansible/ansible.cfg
-    extra_vars: 
-      butter_language: en
-      butter_name: butterbox
-      tags: delta-chat,ap,base,usb,matrix,keanu,website
-      butter_user: "amd"
-      ap_mode_supported: "false"

vmdb2-recipes/amd64_trixie_kanglam.yaml

@@ -1,178 +0,0 @@
----
-# See https://wiki.debian.org/RaspberryPi3 for known issues and more details.
-# image.yml based on revision: ff7fdbf (Switch from qemu-debootstrap to debootstrap., 2024-01-01)
-
-steps:
-  - mkimg: "{{ output }}"
-    size: 3100M
-
-  - mklabel: gpt
-    device: "{{ output }}"
-
-############ efi
-  - mkpart: primary
-    fs-type: 'fat32'
-    device: "{{ output }}"
-    start: 1MiB
-    end: 132MiB
-    tag: efi
-
-  - set_part_flag: "{{ output }}"
-    tag: efi
-    flag: boot
-    state: enabled
-
-  - set_part_flag: "{{ output }}"
-    tag: efi
-    flag: esp
-    state: enabled
-
-############ bios grub
-  - mkpart: primary
-    device: "{{ output }}"
-    start: 132MiB
-    end: 133MiB
-    tag: bios_grub
-
-  - set_part_flag: "{{ output }}"
-    tag: bios_grub
-    flag: bios_grub
-    state: enabled
-############ live
-  - mkpart: primary
-    device: "{{ output }}"
-    start: 133MiB
-    end: 100%
-    tag: tag-root
-
-  - set_part_flag: "{{ output }}"
-    tag: tag-root
-    flag: legacy_boot
-    state: enabled
-
-  - kpartx: "{{ output }}"
-
-  - mkfs: vfat
-    partition: efi
-    label: EFI
-    options: -F32
-
-  - mkfs: ext4
-    partition: tag-root
-    label: boot
-
-  - mount: tag-root
-
-  - shell: |
-      dd bs=440 count=1 conv=notrunc if=/usr/lib/syslinux/mbr/gptmbr.bin of="{{ output }}"
-    root-fs: tag-root
-
-  - unpack-rootfs: tag-root
-
-  - debootstrap: trixie
-    require_empty_target: false
-    mirror: http://deb.debian.org/debian
-    target: tag-root
-    components:
-      - main
-      - non-free-firmware
-      - non-free
-    unless: rootfs_unpacked
-
-  - create-file: /etc/apt/sources.list
-    contents: |+
-      deb http://deb.debian.org/debian trixie main non-free-firmware non-free
-      deb http://deb.debian.org/debian trixie-updates main non-free-firmware non-free
-      deb http://security.debian.org/debian-security trixie-security main non-free-firmware non-free
-
-    unless: rootfs_unpacked
-
-  - apt: install
-    packages:
-      - avahi-daemon
-      - curl
-      - udisks2
-      - wget
-      - dhcpcd
-      - python3
-      - lighttpd
-      - unzip
-      - sudo
-      - systemd-timesyncd
-      - ca-certificates
-      - dosfstools
-      - iw
-      - parted
-      - ssh
-      - wpasupplicant
-      - systemd
-      - systemd-sysv
-      - init-system-helpers 
-      - syslinux
-      - linux-image-amd64
-    tag: tag-root
-    unless: rootfs_unpacked
-
-  - cache-rootfs: tag-root
-    unless: rootfs_unpacked
-
-  - shell: |
-      echo "kanglam" > "${ROOT?}/etc/hostname"
-
-      # Allow root logins locally with no password
-      sed -i 's,root:[^:]*:,root::,' "${ROOT?}/etc/shadow"
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/fstab "${ROOT?}/etc/fstab"
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/network/interfaces.d/eth0 "${ROOT?}/etc/network/interfaces.d/eth0"
-      install -m 600 -o root -g root image-specs/rootfs/etc/network/interfaces.d/wlan0 "${ROOT?}/etc/network/interfaces.d/wlan0"
-    root-fs: tag-root
-
-  # Clean up archive cache (likely not useful) and lists (likely outdated) to
-  # reduce image size by several hundred megabytes.
-  - chroot: tag-root
-    shell: |
-      apt-get clean
-      rm -rf /var/lib/apt/lists
-
-  - grub: bios
-    tag: tag-root
-    console: serial
-#
-  - grub: uefi
-    tag: tag-root
-    efi: efi
-    console: serial
-    
-  - shell: |
-      rm "${ROOT?}/etc/resolv.conf"
-    root-fs: tag-root
-
-  # Clear /etc/machine-id and /var/lib/dbus/machine-id, as both should
-  # be auto-generated upon first boot. From the manpage
-  # (machine-id(5)):
-  #
-  #   For normal operating system installations, where a custom image is
-  #   created for a specific machine, /etc/machine-id should be
-  #   populated during installation.
-  #
-  # Note this will also trigger ConditionFirstBoot=yes for systemd.
-  # On Buster, /etc/machine-id should be an emtpy file, not an absent file
-  # On Bullseye, /etc/machine-id should not exist in an image
-  - chroot: tag-root
-    shell: |
-      rm -f /etc/machine-id /var/lib/dbus/machine-id
-      echo "uninitialized" > /etc/machine-id
-      echo "LABEL=BOOT / ext4 rw 0 1" > /etc/fstab
-
-  - virtual-filesystems: tag-root
-
-  - ansible: tag-root
-    playbook: ../ansible/main.yml
-    config_file: ../ansible/ansible.cfg
-    extra_vars: 
-      butter_language: en
-      butter_name: kanglam
-      tags: base,usb,matrix,keanu,website
-      butter_user: "amd"
-      ap_mode_supported: "false"

vmdb2-recipes/kanglam_pi4.yaml

@@ -1,197 +0,0 @@
----
-# See https://wiki.debian.org/RaspberryPi3 for known issues and more details.
-# image.yml based on revision: ff7fdbf (Switch from qemu-debootstrap to debootstrap., 2024-01-01)
-
-steps:
-  - mkimg: "{{ output }}"
-    size: 3100M
-
-  - mklabel: msdos
-    device: "{{ output }}"
-
-  - mkpart: primary
-    fs-type: 'fat32'
-    device: "{{ output }}"
-    start: 4MiB
-    end: 512MiB
-    tag: tag-firmware
-
-  - mkpart: primary
-    device: "{{ output }}"
-    start: 512MiB
-    end: 100%
-    tag: tag-root
-
-  - kpartx: "{{ output }}"
-
-  - mkfs: vfat
-    partition: tag-firmware
-    label: RASPIFIRM
-
-  - mkfs: ext4
-    partition: tag-root
-    label: RASPIROOT
-
-  - mount: tag-root
-
-  - mount: tag-firmware
-    mount-on: tag-root
-    dirname: '/boot/firmware'
-
-  - unpack-rootfs: tag-root
-
-  - debootstrap: trixie
-    require_empty_target: false
-    mirror: http://deb.debian.org/debian
-    target: tag-root
-    arch: arm64
-    components:
-      - main
-      - non-free-firmware
-      - non-free
-    unless: rootfs_unpacked
-
-  - create-file: /etc/apt/sources.list
-    contents: |+
-      deb http://deb.debian.org/debian trixie main non-free-firmware non-free
-      deb http://deb.debian.org/debian trixie-updates main non-free-firmware non-free
-      deb http://security.debian.org/debian-security trixie-security main non-free-firmware non-free
-      # Backports are _not_ enabled by default.
-      # Enable them by uncommenting the following line:
-      # deb http://deb.debian.org/debian trixie-backports main non-free-firmware
-
-    unless: rootfs_unpacked
-
-  - copy-file: /etc/initramfs-tools/hooks/rpi-resizerootfs
-    src: image-specs/rootfs/etc/initramfs-tools/hooks/rpi-resizerootfs
-    perm: 0755
-    unless: rootfs_unpacked
-
-  - copy-file: /etc/initramfs-tools/scripts/local-bottom/rpi-resizerootfs
-    src: image-specs/rootfs/etc/initramfs-tools/scripts/local-bottom/rpi-resizerootfs
-    perm: 0755
-    unless: rootfs_unpacked
-
-  - apt: install
-    packages:
-      - avahi-daemon
-      - curl
-      - udisks2
-      - wget
-      - dhcpcd
-      - dnsmasq
-      - python3
-      - lighttpd
-      - unzip
-      - sudo
-      - systemd-timesyncd
-      - ca-certificates
-      - dosfstools
-      - iw
-      - parted
-      - ssh
-      - wpasupplicant
-      - systemd-timesyncd
-      - linux-image-arm64
-      - raspi-firmware
-      - firmware-brcm80211
-      - bluez-firmware
-    tag: tag-root
-    unless: rootfs_unpacked
-
-  - cache-rootfs: tag-root
-    unless: rootfs_unpacked
-
-  - shell: |
-      echo "kanglam" > "${ROOT?}/etc/hostname"
-      sed -i "s,root:[^:]*:,root::," "${ROOT?}/etc/shadow"
-
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/fstab "${ROOT?}/etc/fstab"
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/network/interfaces.d/eth0 "${ROOT?}/etc/network/interfaces.d/eth0"
-      install -m 600 -o root -g root image-specs/rootfs/etc/network/interfaces.d/wlan0 "${ROOT?}/etc/network/interfaces.d/wlan0"
-
-      install -m 755 -o root -g root image-specs/rootfs/usr/local/sbin/rpi-set-sysconf "${ROOT?}/usr/local/sbin/rpi-set-sysconf"
-      install -m 644 -o root -g root image-specs/rootfs/etc/systemd/system/rpi-set-sysconf.service "${ROOT?}/etc/systemd/system/"
-      install -m 644 -o root -g root image-specs/rootfs/boot/firmware/sysconf.txt "${ROOT?}/boot/firmware/sysconf.txt"
-      mkdir -p "${ROOT?}/etc/systemd/system/basic.target.requires/"
-      ln -s /etc/systemd/system/rpi-set-sysconf.service "${ROOT?}/etc/systemd/system/basic.target.requires/rpi-set-sysconf.service"
-
-      # Resize script is now in the initrd for first boot; no need to ship it.
-      rm -f "${ROOT?}/etc/initramfs-tools/hooks/rpi-resizerootfs"
-      rm -f "${ROOT?}/etc/initramfs-tools/scripts/local-bottom/rpi-resizerootfs"
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/systemd/system/rpi-reconfigure-raspi-firmware.service "${ROOT?}/etc/systemd/system/"
-      mkdir -p "${ROOT?}/etc/systemd/system/multi-user.target.requires/"
-      ln -s /etc/systemd/system/rpi-reconfigure-raspi-firmware.service "${ROOT?}/etc/systemd/system/multi-user.target.requires/rpi-reconfigure-raspi-firmware.service"
-
-      install -m 644 -o root -g root image-specs/rootfs/etc/systemd/system/rpi-generate-ssh-host-keys.service "${ROOT?}/etc/systemd/system/"
-      ln -s /etc/systemd/system/rpi-generate-ssh-host-keys.service "${ROOT?}/etc/systemd/system/multi-user.target.requires/rpi-generate-ssh-host-keys.service"
-      rm -f "${ROOT?}"/etc/ssh/ssh_host_*_key*
-
-    root-fs: tag-root
-
-  # Copy the relevant device tree files to the boot partition
-  - chroot: tag-root
-    shell: |
-      install -m 644 -o root -g root /usr/lib/linux-image-*-arm64/broadcom/bcm*rpi*.dtb /boot/firmware/
-
-  # Clean up archive cache (likely not useful) and lists (likely outdated) to
-  # reduce image size by several hundred megabytes.
-  - chroot: tag-root
-    shell: |
-      apt-get clean
-      rm -rf /var/lib/apt/lists
-
-  # Modify the kernel commandline we take from the firmware to boot from
-  # the partition labeled raspiroot instead of forcing it to mmcblk0p2.
-  # Also insert the serial console right before the root= parameter.
-  #
-  # These changes will be overwritten after the hardware is probed
-  # after dpkg reconfigures raspi-firmware (upon first boot), so make
-  # sure we don't lose label-based booting.
-  - chroot: tag-root
-    shell: |
-      sed -i 's/root=/console=ttyS1,115200 root=/' /boot/firmware/cmdline.txt
-      sed -i 's#root=/dev/mmcblk0p2#root=LABEL=RASPIROOT#' /boot/firmware/cmdline.txt
-      sed -i 's/^#ROOTPART=.*/ROOTPART=LABEL=RASPIROOT/' /etc/default/raspi*-firmware
-
-      sed -i 's/cma=64M //' /boot/firmware/cmdline.txt
-
-  # TODO(https://github.com/larswirzenius/vmdb2/issues/24): remove once vmdb
-  # clears /etc/resolv.conf on its own.
-  - shell: |
-      rm "${ROOT?}/etc/resolv.conf"
-    root-fs: tag-root
-
-  # Clear /etc/machine-id and /var/lib/dbus/machine-id, as both should
-  # be auto-generated upon first boot. From the manpage
-  # (machine-id(5)):
-  #
-  #   For normal operating system installations, where a custom image is
-  #   created for a specific machine, /etc/machine-id should be
-  #   populated during installation.
-  #
-  # Note this will also trigger ConditionFirstBoot=yes for systemd.
-  # On Buster, /etc/machine-id should be an emtpy file, not an absent file
-  # On Bullseye, /etc/machine-id should not exist in an image
-  - chroot: tag-root
-    shell: |
-      rm -f /etc/machine-id /var/lib/dbus/machine-id
-      echo "uninitialized" > /etc/machine-id
-
-  # Create /etc/raspi-image-id to know, from what commit the image was built
-  - chroot: tag-root
-    shell: |
-      echo "image based on revision: ff7fdbf (Switch from qemu-debootstrap to debootstrap., 2024-01-01) and build on 2025-10-27 20:22 (UTC)" > "/etc/raspi-image-id"
-
-  - virtual-filesystems: tag-root
-
-  - ansible: tag-root
-    playbook: ../ansible/main.yml
-    config_file: ../ansible/ansible.cfg
-    extra_vars: 
-      butter_language: bo 
-      butter_name: kanglam
-

vmdb2-recipes/raspi_4_trixie.yaml

@@ -75,20 +75,13 @@ steps:
   - apt: install
     packages:
       - avahi-daemon
-      - avahi-utils
-      - locales
-      - fake-hwclock
       - curl
       - udisks2
       - wget
       - dhcpcd
       - dnsmasq
       - python3
-      - python3-packaging
-      - python3-virtualenv
-      - nginx
       - lighttpd
-      - git
       - unzip
       - sudo
       - systemd-timesyncd

vmdb2-recipes/run_build_amd64.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-
-GIT_BRANCH=$(git branch --show-current 2>/dev/null)
-GIT_TAG=$(git tag 2>/dev/null | tail -n1)
-BUILD_DATE=$(date +"%d%m%y")
-SUFFIX="${GIT_BRANCH}_${GIT_TAG}_${BUILD_DATE}"
-time vmdb2 --rootfs-tarball=64_$SUFFIX.tar.gz --output 64_butter_$SUFFIX.img --log 64_butter_$SUFFIX.log amd64_trixie.yaml
-tar cvfz 64_butter_$SUFFIX.img.tar.gz 64_butter_$SUFFIX.img  
-#curl -H "Authorization: token" $CHURN_SECRET -X PUT --upload-file raspi4_butter_$SUFFIX.img.tar.gz https://guardianproject.dev/api/packages/butter/generic/churn/latest/raspi4_butter_$SUFFIX.img.tar.gz
-#rm *img *tar.gz 

vmdb2-recipes/run_build_amd64_kanglam.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-
-GIT_BRANCH=$(git branch --show-current 2>/dev/null)
-GIT_TAG=$(git tag 2>/dev/null | head -n1)
-BUILD_DATE=$(date +"%d%m%y")
-SUFFIX="${GIT_BRANCH}_${GIT_TAG}_${BUILD_DATE}"
-time vmdb2 --rootfs-tarball=64_$SUFFIX.tar.gz --output 64_butter_$SUFFIX.img --log 64_butter_$SUFFIX.log amd64_trixie_kanglam.yaml
-tar cvfz 64_butter_$SUFFIX.img.tar.gz 64_butter_$SUFFIX.img  
-#curl -H "Authorization: token" $CHURN_SECRET -X PUT --upload-file raspi4_butter_$SUFFIX.img.tar.gz https://guardianproject.dev/api/packages/butter/generic/churn/latest/raspi4_butter_$SUFFIX.img.tar.gz
-#rm *img *tar.gz 

vmdb2-recipes/run_build_raspi4.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-
-GIT_BRANCH=$(git branch --show-current 2>/dev/null)
-GIT_TAG=$(git tag 2>/dev/null | tail -n1)
-BUILD_DATE=$(date +"%d%m%y")
-SUFFIX="${GIT_BRANCH}_${GIT_TAG}_${BUILD_DATE}"
-time vmdb2 --rootfs-tarball=raspi4_$SUFFIX.tar.gz --output raspi4_butter_$SUFFIX.img --log raspi4_butter_$SUFFIX.log raspi_4_trixie.yaml 
-tar cvfz raspi4_butter_$SUFFIX.img.tar.gz raspi4_butter_$SUFFIX.img
-#curl -H "Authorization: token" $CHURN_SECRET -X PUT --upload-file raspi4_butter_$SUFFIX.img.tar.gz https://guardianproject.dev/api/packages/butter/generic/churn/latest/raspi4_butter_$SUFFIX.img.tar.gz
-#rm *img *tar.gz 

vmdb2-recipes/run_build_raspi4_kanglam.sh

@@ -1,10 +0,0 @@
-#!/usr/bin/env bash
-
-GIT_BRANCH=$(git branch --show-current 2>/dev/null)
-GIT_TAG=$(git tag 2>/dev/null | tail -n1)
-BUILD_DATE=$(date +"%d%m%y")
-SUFFIX="${GIT_BRANCH}_${GIT_TAG}_${BUILD_DATE}"
-time vmdb2 --rootfs-tarball=raspi4_$SUFFIX.tar.gz --output raspi4_butter_$SUFFIX.img --log raspi4_butter_$SUFFIX.log kanglam_pi4.yaml 
-tar cvfz raspi4_butter_$SUFFIX.img.tar.gz raspi4_butter_$SUFFIX.img  
-#curl -H "Authorization: token" $CHURN_SECRET -X PUT --upload-file raspi4_butter_$SUFFIX.img.tar.gz https://guardianproject.dev/api/packages/butter/generic/churn/latest/raspi4_butter_$SUFFIX.img.tar.gz
-#rm *img *tar.gz