diff --git a/LICENCE b/LICENCE
new file mode 100644
index 0000000..6a7670e
--- /dev/null
+++ b/LICENCE
@@ -0,0 +1,56 @@
+Copyright © 2017, Michael Stapelberg and contributors
+Copyright © 2021, guardianproject
+Copyright © 2025-2026, SR2 Communications Limited
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of Michael Stapelberg nor the
+      names of contributors may be used to endorse or promote products
+      derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY Michael Stapelberg ''AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL Michael Stapelberg BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Additionally, we include here the original licence terms as required by the terms
+of the Butter Box for Raspberry Pi project, which apply only to the code derived
+from that project:
+
+MIT License
+
+Copyright (c) 2021 guardianproject
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
diff --git a/README.md b/README.md
index 8bfa6a5..7537a00 100644
--- a/README.md
+++ b/README.md
@@ -1,5 +1,28 @@
-# Churn
+# Butter Churn
 
-This is work in progress. 
+[![License](https://img.shields.io/badge/License-BSD_3--Clause-orange.svg)](https://opensource.org/licenses/BSD-3-Clause)
 
-To build a butter image, run vmdb2 --rootfs-tarball=my_image.tar.gz --output my_image.img --log my_image.log
\ No newline at end of file
+Tool for building Butter Box disk images.
+
+## Usage
+
+To build a butter image, run:
+
+```sh
+vmdb2 --rootfs-tarball=my_image.tar.gz --output my_image.img --log my_image.log
+```
+
+## Copyright and Licence
+
+© 2017, Michael Stapelberg and contributors
+© 2021 guardianproject
+© SR2 Communications Limited
+
+See [LICENCE](./LICENCE) for details of the BSD-3 clause licence.
+
+This project is a derivative work of:
+
+* [Butter Box for Raspberry Pi](https://gitlab.com/likebutter/butterbox-rpi)
+  licensed under the MIT licence.
+* [Raspberry Pi Image Specs](https://salsa.debian.org/raspi-team/image-specs)
+  licensed under the 3-clause BSD licence.
diff --git a/ansible/butter-base.yml b/ansible/butter-base.yml
index 036e9f6..5a68064 100644
--- a/ansible/butter-base.yml
+++ b/ansible/butter-base.yml
@@ -13,28 +13,28 @@
         name: "{{ butter_user }}"
         state: present
 
-    - name: Get supported interface modes
-      command: iw list
-      register: iw_list
-      ignore_errors: yes
-      when: not (is_vmdb2 | bool)
+    - name: Add butter user to sudo group
+      ansible.builtin.user:
+        name: "{{ butter_user }}"
+        groups: sudo
+        append: true
 
-    - name: Search for AP mode support
-      set_fact:
-        ap_mode_supported: "{{ 'AP' in iw_list.stdout }}"
-      when: not (is_vmdb2 | bool)
-
-    - name: Show AP mode support result
-      debug:
-        msg: >
-          Wi-Fi AP mode supported: {{ ap_mode_supported }}
-      when: not (is_vmdb2 | bool)
+    - name: Allow passwordless sudo for butter user
+      ansible.builtin.lineinfile:
+        path: /etc/sudoers
+        state: present
+        regexp: "^{{ butter_user }}"
+        line: "{{ butter_user }} ALL=(ALL) NOPASSWD:ALL"
+        validate: '/usr/sbin/visudo -cf %s'
 
     - name: Make sure /etc/resolv.conf is populated
-      lineinfile:
+      ansible.builtin.lineinfile:
         path: /etc/resolv.conf
         regexp: '^nameserver 1.1.1.1'
         line: 'nameserver 1.1.1.1'
         state: present
         insertafter: EOF
-        create: yes
+        create: true
+        owner: root
+        group: root
+        mode: '0644'
diff --git a/ansible/cleanup.yml b/ansible/cleanup.yml
index c1ed62c..3c30381 100644
--- a/ansible/cleanup.yml
+++ b/ansible/cleanup.yml
@@ -4,11 +4,9 @@
   become: true
   tasks:
     - name: Print Dendrite process info for debugging
-      become: yes
       ansible.builtin.shell: |
         echo "=== Dendrite PIDs ==="
         pgrep -u {{ butter_user }} -f dendrite || echo "No dendrite PIDs found"
-    
         echo
         echo "=== Full process tree of Dendrite ==="
         for pid in $(pgrep -u {{ butter_user }} -f dendrite); do
@@ -16,34 +14,28 @@
             pstree -p $pid || echo "pstree not available for PID $pid"
             echo
         done
-    
-        echo "=== Open files under VMDB mount ==="
-        lsof +D /tmp/tmpyu_8dsew || echo "No open files found"
-    
-        echo "=== Current working directories of processes in mount ==="
-        lsof +D /tmp/tmpyu_8dsew | awk '{print $2, $NF}' | sort | uniq
       register: dendrite_debug
       when: is_vmdb2 | bool
+      changed_when: false
 
     - name: Show debug output
-      debug:
+      ansible.builtin.debug:
         msg: "{{ dendrite_debug.stdout_lines }}"
       when: is_vmdb2 | bool
 
     - name: Kill any running Dendrite process
-      become: yes
       ansible.builtin.shell: |
-        pgrep -u {{ butter_user }} -f dendrite | xargs -r kill -9
+       set -o pipefail && pgrep -u {{ butter_user }} -f dendrite | xargs -r kill -9
       register: dendrite_cleanup
       changed_when: dendrite_cleanup.stdout != ""
       when: is_vmdb2 | bool
-    
+
     - name: Show cleanup output
       ansible.builtin.debug:
         msg: "{{ dendrite_cleanup.stdout_lines }}"
       when: is_vmdb2 | bool
 
     - name: Give processes time to exit
-      become: yes
-      shell: sleep 5
+      ansible.builtin.pause:
+        seconds: 5
       when: is_vmdb2 | bool
diff --git a/ansible/debian.md b/ansible/debian.md
new file mode 100644
index 0000000..e69de29
diff --git a/ansible/delta-chat.yml b/ansible/delta-chat.yml
index 5f17f0b..c5561ac 100644
--- a/ansible/delta-chat.yml
+++ b/ansible/delta-chat.yml
@@ -4,7 +4,7 @@
   become: true
   tasks:
     - name: Create madmail directory
-      file:
+      ansible.builtin.file:
         path: "/home/{{ butter_user }}/madmail"
         state: directory
         owner: "{{ butter_user }}"
@@ -12,20 +12,22 @@
         mode: "0755"
 
     - name: Download pre-built madmail archive
-      get_url:
+      ansible.builtin.get_url:
         url: "https://github.com/themadorg/madmail/releases/download/v0.12.7/madmail-linux-{{ go_arch_map[ansible_architecture] }}.tar.gz"
         dest: "/tmp/madmail-linux-{{ go_arch_map[ansible_architecture] }}.tar.gz"
         mode: '0644'
 
     - name: Untar madmail
-      unarchive:
+      ansible.builtin.unarchive:
         src: "/tmp/madmail-linux-{{ go_arch_map[ansible_architecture] }}.tar.gz"
         dest: "/home/{{ butter_user }}/madmail"
-        remote_src: yes
-        #extra_opts: [--strip-components=1]
+        remote_src: true
+        # extra_opts: [--strip-components=1]
 
     - name: Ensure butter_user owns madmail directory
-      file:
+      ansible.builtin.file:
         path: "/home/{{ butter_user }}/madmail"
         state: directory
-        recurse: yes
+        recurse: true
+        owner: "{{ butter_user }}"
+        group: "{{ butter_user }}"
diff --git a/ansible/deploy-butter-portal.yml b/ansible/deploy-butter-portal.yml
new file mode 100644
index 0000000..bc6e0b5
--- /dev/null
+++ b/ansible/deploy-butter-portal.yml
@@ -0,0 +1,102 @@
+---
+- name: Deploy butter portal
+  hosts: all
+  become: true
+
+  tasks:
+    - name: "Ensure /tmp/butter-portal is absent"
+      ansible.builtin.file:
+        path: "/home/{{ butter_user }}/butter-portal"
+        state: absent
+
+    - name: "Clone the portal repo"
+      ansible.builtin.git:
+        repo: "https://guardianproject.dev/butter/butter-portal"
+        dest: "/home/{{ butter_user }}/butter-portal"
+        version: main
+
+    - name: Install requirements
+      ansible.builtin.pip:
+        requirements: "/home/{{ butter_user }}/butter-portal/requirements.txt"
+        virtualenv: "/home/{{ butter_user }}/portal_env"
+        virtualenv_python: python3
+
+    - name: Seed database
+      ansible.builtin.shell: |
+        echo "Starting db initialisation!"
+        source /home/{{ butter_user }}/portal_env/bin/activate
+        flask db init
+        flask db migrate
+        flask db upgrade
+        flask seed-settings
+      args:
+        chdir: "/home/{{ butter_user }}/butter-portal"
+        executable: /bin/bash
+        creates: "/home/{{ butter_user }}/butter-portal/app.db"
+      register: database_init
+
+    - name: Template portal systemd service file
+      ansible.builtin.template:
+        src: templates/butterbox-portal.service.j2
+        dest: /lib/systemd/system/butterbox-portal.service
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Template portal change manager service file
+      ansible.builtin.template:
+        src: templates/change-manager.service.j2
+        dest: /lib/systemd/system/change-manager.service
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Template nginx config
+      ansible.builtin.template:
+        src: templates/nginx-config.j2
+        dest: /etc/nginx/sites-available/default
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Enable portal by symlink
+      ansible.builtin.file:
+        src: /lib/systemd/system/butterbox-portal.service
+        dest: /etc/systemd/system/multi-user.target.wants/butterbox-portal.service
+        state: link
+
+    - name: Enable change manager by symlink
+      ansible.builtin.file:
+        src: /lib/systemd/system/change-manager.service
+        dest: /etc/systemd/system/multi-user.target.wants/change-manager.service
+        state: link
+
+    - name: Ensure butter_user owns portal directory
+      ansible.builtin.file:
+        path: "/home/{{ butter_user }}/butter-portal"
+        state: directory
+        recurse: true
+        owner: "{{ butter_user }}"
+        group: "{{ butter_user }}"
+#    - name: Template portal reverse proxy config for Lighttpd
+#      ansible.builtin.get_url:
+#        src: templates/50-butter-portal-reverse-proxy.conf
+#        dest: /etc/lighttpd/conf-available/50-butter-portal-reverse-proxy.conf
+#        owner: root
+#        group: root
+#        mode: '0644'
+#
+#    - name: Ensure old symlink is removed if it exists
+#      ansible.builtin.file:
+#        path: /etc/lighttpd/conf-enabled/50-butter-portal-reverse-proxy.conf
+#        state: absent
+#        force: true
+#
+#    - name: Enable reverse proxy config for portal in Lighttpd
+#      ansible.builtin.file:
+#        src: /etc/lighttpd/conf-available/50-butter-portal-reverse-proxy.conf
+#        dest: /etc/lighttpd/conf-enabled/50-butter-portal-reverse-proxy.conf
+#        state: link
+#        force: true
+#
+    # - debug: var=database_init.stdout_lines
diff --git a/ansible/deploy-butter-site.yml b/ansible/deploy-butter-site.yml
deleted file mode 100644
index c926661..0000000
--- a/ansible/deploy-butter-site.yml
+++ /dev/null
@@ -1,59 +0,0 @@
----
-- name: Deploy butter site
-  hosts: all
-  become: true
-
-  tasks:
-    - name: Install unzip
-      apt:
-        name:
-          - unzip
-        state: present
-        update_cache: yes
-      when: not ( is_vmdb2 | bool )
-
-    - name: Ensure /etc/resolv.conf contains nameserver 1.1.1.1
-      copy:
-        dest: /etc/resolv.conf
-        content: "nameserver 1.1.1.1\n"
-        owner: root
-        group: root
-        mode: '0644'
-      when: is_vmdb2 | bool
-
-    - name: Ensure /tmp/butter-site is absent
-      file:
-        path: /tmp/butter-site
-        state: absent
-
-    - name: Ensure /tmp/site.zip is absent
-      file:
-        path: /tmp/site.zip
-        state: absent
-
-    - name: Download the butter-box UI zip file
-      get_url:
-        url: "https://likebutter.gitlab.io/butter-box-ui/site-{{ butter_language }}.zip"
-        dest: /tmp/site.zip
-        mode: '0644'
-       
-    - name: Ensure /tmp/butter-site directory exists
-      file:
-        path: /tmp/butter-site
-        state: directory
-        mode: '0755'
-
-    - name: Unarchive site.zip to /tmp/butter-site
-      unarchive:
-        src: /tmp/site.zip
-        dest: /tmp/butter-site
-        remote_src: yes
-
-    - name: Copy contents to /var/www/html/
-      copy:
-        src: /tmp/butter-site/
-        dest: /var/www/html/
-        owner: www-data
-        group: www-data
-        mode: '0755'
-        remote_src: yes
diff --git a/ansible/group_vars/all.yml b/ansible/group_vars/all.yml
index e9768ea..46de7ba 100644
--- a/ansible/group_vars/all.yml
+++ b/ansible/group_vars/all.yml
@@ -4,8 +4,6 @@ go_version: "1.24.6"
 go_arch_map:
   x86_64: "amd64"
   aarch64: "arm64"
-script_base_url: "https://gitlab.com/likebutter/butterbox-rpi/-/raw/main/scripts"
-config_base_url: "https://gitlab.com/likebutter/butterbox-rpi/-/raw/main/configs"
 
 vmdb2_script_base_dir: "butterbox-rpi/scripts"
 vmdb2_config_base_dir: "butterbox-rpi/configs"
diff --git a/ansible/install-ap-optimized-firmware.yml b/ansible/install-ap-optimized-firmware.yml
index a76f6d4..556a309 100644
--- a/ansible/install-ap-optimized-firmware.yml
+++ b/ansible/install-ap-optimized-firmware.yml
@@ -10,4 +10,4 @@
       register: firmware_update
       changed_when: firmware_update.rc == 0
       failed_when: firmware_update.rc != 0
-      ignore_errors: yes
+      ignore_errors: true
diff --git a/ansible/install-chat.yml b/ansible/install-chat.yml
index 4e887a8..2bea966 100644
--- a/ansible/install-chat.yml
+++ b/ansible/install-chat.yml
@@ -4,18 +4,18 @@
   become: true
   tasks:
     - name: Install deps
-      apt:
+      ansible.builtin.apt:
         name:
           - git
           - vim
           - lighttpd
           - sudo
         state: present
-        update_cache: yes
-      when: not ( is_vmdb2 | bool )
+        update_cache: true
+      when: not (is_vmdb2 | bool)
 
     - name: Create dendrite directories
-      file:
+      ansible.builtin.file:
         path: "/home/{{ butter_user }}/dendrite/bin"
         state: directory
         owner: "{{ butter_user }}"
@@ -23,94 +23,72 @@
         mode: "0755"
 
     - name: Download pre-built dendrite archive
-      get_url:
+      ansible.builtin.get_url:
         url: "https://guardianproject.dev/api/packages/butter/generic/dendrite/latest/dendrite-{{ go_arch_map[ansible_architecture] }}.tar.gz"
         dest: /tmp
         mode: '0644'
 
     - name: Untar dendrite
-      unarchive:
+      ansible.builtin.unarchive:
         src: "/tmp/dendrite-{{ go_arch_map[ansible_architecture] }}.tar.gz"
         dest: "/home/{{ butter_user }}/dendrite/bin"
-        remote_src: yes
+        remote_src: true
         extra_opts: [--strip-components=2]
 
     - name: Ensure butter_user owns Dendrite directory
-      file:
+      ansible.builtin.file:
         path: "/home/{{ butter_user }}/dendrite"
         state: directory
-        recurse: yes
+        recurse: true
 
     - name: Generate Matrix signing key
-      command: ./bin/generate-keys --private-key matrix_key.pem
+      ansible.builtin.command: ./bin/generate-keys --private-key matrix_key.pem
       args:
+        creates: "/home/{{ butter_user }}/dendrite/matrix_key.pem"
         chdir: "/home/{{ butter_user }}/dendrite"
 
     - name: Generate self-signed TLS certificate (optional)
-      command: ./bin/generate-keys --tls-cert server.crt --tls-key server.key
+      ansible.builtin.command: ./bin/generate-keys --tls-cert server.crt --tls-key server.key
       args:
         chdir: "/home/{{ butter_user }}/dendrite"
+        creates: "/home/{{ butter_user }}/dendrite/server.key"
 
     - name: Download Dendrite config to target
-      get_url:
-        url: "{{ config_base_url }}/butterbox-dendrite.conf"
+      ansible.builtin.template:
+        src: "templates/butterbox-dendrite.conf.j2"
         dest: "/home/{{ butter_user }}/dendrite/butterbox-dendrite.conf"
         owner: "{{ butter_user }}"
         group: "{{ butter_user }}"
         mode: '0644'
 
-    - name: Replace REPLACEME with butter_name in config
-      replace:
-        path: "/home/{{ butter_user }}/dendrite/butterbox-dendrite.conf"
-        regexp: 'REPLACEME'
-        replace: "{{ butter_name }}"
-
-    - name: Replace /home/pi with /home/butter_user in config
-      replace:
-        path: "/home/{{ butter_user }}/dendrite/butterbox-dendrite.conf"
-        regexp: '/pi/'
-        replace: "/{{ butter_user }}/"
-
     - name: Create log directory for Dendrite
-      file:
+      ansible.builtin.file:
         path: "/var/log/dendrite"
         state: directory
         owner: "{{ butter_user }}"
         group: "{{ butter_user }}"
         mode: '0755'
-        recurse: yes
+        recurse: true
 
-    - name: Download dendrite systemd service file
-      get_url:
-        url: "{{ config_base_url }}/butterbox-dendrite.service"
+    - name: template dendrite systemd service file
+      ansible.builtin.template:
+        src: templates/butterbox-dendrite.service.j2
         dest: /lib/systemd/system/dendrite.service
         owner: root
         group: root
         mode: '0644'
 
-    - name: Replace /home/pi with /home/butter_user in service file
-      replace:
-        path: /lib/systemd/system/dendrite.service
-        regexp: '/pi/'
-        replace: "/{{ butter_user }}/"
-
-    - name: Replace pi with butter_user in service file
-      replace:
-        path: /lib/systemd/system/dendrite.service
-        regexp: 'User=pi'
-        replace: "User={{ butter_user }}"
-
     - name: Enable dendrite by symlink
-      file:
+      ansible.builtin.file:
         src: /lib/systemd/system/dendrite.service
         dest: /etc/systemd/system/multi-user.target.wants/dendrite.service
         state: link
 
     - name: Ensure butter_user owns Dendrite directory
-      file:
+      ansible.builtin.file:
         path: "/home/{{ butter_user }}/dendrite"
         state: directory
-        recurse: yes
+        recurse: true
         owner: "{{ butter_user }}"
         group: "{{ butter_user }}"
         mode: "0755"
@@ -122,31 +100,10 @@
         name: dendrite
       when: not (is_vmdb2 | bool)
 
-    - name: Download Matrix reverse proxy config for Lighttpd
-      get_url:
-        url: "{{ config_base_url }}/50-matrix-reverse-proxy.conf"
-        dest: /etc/lighttpd/conf-available/50-matrix-reverse-proxy.conf
-        owner: root
-        group: root
-        mode: '0644'
-
-    - name: Ensure old symlink is removed if it exists
-      file:
-        path: /etc/lighttpd/conf-enabled/50-matrix-reverse-proxy.conf
-        state: absent
-        force: true
- 
-    - name: Enable reverse proxy config for Matrix in Lighttpd
-      file:
-        src: /etc/lighttpd/conf-available/50-matrix-reverse-proxy.conf
-        dest: /etc/lighttpd/conf-enabled/50-matrix-reverse-proxy.conf
-        state: link
-        force: true
-
     - name: Start dendrite as user butter_user
-      become: yes
+      become: true
       become_user: "{{ butter_user }}"
-      shell: |
+      ansible.builtin.shell: |
         nohup /home/{{ butter_user }}/dendrite/bin/dendrite \
           --config /home/{{ butter_user }}/dendrite/butterbox-dendrite.conf \
           -really-enable-open-registration \
@@ -154,28 +111,29 @@
       args:
         chdir: "/home/{{ butter_user }}"
       when: is_vmdb2 | bool
-
+      changed_when: false
 
     - name: Wait for Dendrite client API to be available
-      wait_for:
+      ansible.builtin.wait_for:
         host: "127.0.0.1"
         port: 8008
         delay: 3         # wait a few seconds before first check
         timeout: 60      # give it up to a minute to start
         state: started
       when: is_vmdb2 | bool
-    
+
     - name: Copy public room script
-      template:
+      ansible.builtin.template:
         src: templates/create_public_room.sh.j2
         dest: "/home/{{ butter_user }}/create_public_room.sh"
         mode: '0755'
-  
+
     - name: Run the create_public_room.sh script
-      command: "/home/{{ butter_user }}/create_public_room.sh"
+      ansible.builtin.command: "/home/{{ butter_user }}/create_public_room.sh"
       register: room_creation
-      ignore_errors: false 
-    
+      ignore_errors: false
+      changed_when: false
+
     - name: Show room creation output
-      debug:
+      ansible.builtin.debug:
         var: room_creation.stdout
diff --git a/ansible/install-keanu-weblite.yml b/ansible/install-keanu-weblite.yml
index bb3c288..e3664f3 100644
--- a/ansible/install-keanu-weblite.yml
+++ b/ansible/install-keanu-weblite.yml
@@ -4,20 +4,21 @@
   become: true
   tasks:
     - name: Install Node.js 22 (needed for matrix-js-sdk)
-      shell: |
-        curl -fsSL https://deb.nodesource.com/setup_22.x | bash -
+      ansible.builtin.shell: |
+        set -o pipefail curl -fsSL https://deb.nodesource.com/setup_22.x | bash -
         apt-get install -y nodejs
       args:
         executable: /bin/bash
+        creates: /bin/npm
 
     - name: Ensure previous keanu-weblite temp directory is removed
-      file:
+      ansible.builtin.file:
         path: /tmp/keanu-weblite
         state: absent
       delegate_to: localhost
 
     - name: Clone keanu-weblite repository (dev branch)
-      git:
+      ansible.builtin.git:
         repo: https://gitlab.com/keanuapp/keanuapp-weblite.git
         dest: /tmp/keanu-weblite
         version: dev
@@ -25,51 +26,38 @@
       delegate_to: localhost
 
     - name: Run npm install
-      shell: npm install
+      ansible.builtin.command: npm install
       args:
         chdir: /tmp/keanu-weblite
       delegate_to: localhost
+      changed_when: false
 
     - name: Download keanu-weblite config file
-      get_url:
-        url: "{{ config_base_url }}/keanu-weblite-config.json"
+      ansible.builtin.template:
+        src: "templates/keanu-weblite-config.json.j2"
         dest: /tmp/keanu-weblite/src/assets/config.json
         mode: '0644'
       delegate_to: localhost
 
-    - name: Replace REPLACEME with butter_name in config.json
-      replace:
-        path: /tmp/keanu-weblite/src/assets/config.json
-        regexp: 'REPLACEME'
-        replace: "{{ butter_name }}"
-      delegate_to: localhost
-
     - name: Run npm build with legacy OpenSSL option
-      shell: |
+      ansible.builtin.shell: |
         export NODE_OPTIONS=--openssl-legacy-provider
         npm run build
       args:
         chdir: /tmp/keanu-weblite
       delegate_to: localhost
+      changed_when: false
 
     - name: Copy build output to /var/www/html/chat
-      become: true
-      copy: 
-         src:  /tmp/keanu-weblite/dist/
-         dest:  /var/www/html/chat/
+      ansible.builtin.copy:
+        src: /tmp/keanu-weblite/dist/
+        dest: /var/www/html/chat/
+        mode: '0755'
 
     - name: Set permissions for /var/www/html/chat
-      become: true
-      file:
+      ansible.builtin.file:
         path: /var/www/html/chat
         owner: www-data
         group: www-data
         mode: '0755'
-        recurse: yes
-
-    - name: Restart lighttpd service
-      ansible.builtin.systemd:
-        name: lighttpd
-        state: restarted
-      when: not (is_vmdb2 | bool)
-
+        recurse: true
diff --git a/ansible/install-rasp-ap.yml b/ansible/install-rasp-ap.yml
index b023df9..e9e390a 100644
--- a/ansible/install-rasp-ap.yml
+++ b/ansible/install-rasp-ap.yml
@@ -9,21 +9,27 @@
     raspap_adblock: 0
 
   tasks:
+    - name: ensure lighttpd listens on port 8080
+      ansible.builtin.lineinfile:
+        path: /etc/lighttpd/lighttpd.conf
+        regexp: '^server.port'
+        line: server.port=8080
+
     - name: Check if RaspAP is already installed
       ansible.builtin.stat:
-        path: /var/www/html/admin
+        path: /var/www/html/raspap
       register: raspap_stat
 
     - name: Download RaspAP install script
-      get_url:
+      ansible.builtin.get_url:
         url: https://install.raspap.com
         dest: /tmp/raspap_install.sh
         mode: "0755"
-      when: not raspap_stat.stat.exists 
+      when: not raspap_stat.stat.exists
 
     - name: Run RaspAP install script
       ansible.builtin.shell: |
-        pwd && ls -alh / && /usr/bin/bash /tmp/raspap_install.sh --yes --path /var/www/html/admin \
+        pwd && ls -alh / && /usr/bin/bash /tmp/raspap_install.sh --yes --path /var/www/html/raspap \
         --check 0 \
         --wireguard {{ raspap_wireguard }} \
         --openvpn {{ raspap_openvpn }} \
@@ -35,45 +41,44 @@
       failed_when: raspap_install.rc != 0
 
     - name: Remove /var/www/html.* directories if they exist
-      become: true
       ansible.builtin.shell: |
         find /var/www/html.* -maxdepth 0 -type d -exec rm -r {} \; || :
       changed_when: false
 
     - name: Ensure /etc/hostapd directory exists
-      file:
+      ansible.builtin.file:
         path: /etc/hostapd
         state: directory
         mode: '0755'
 
     - name: Template RaspAP network config to target
-      template:
+      ansible.builtin.template:
         src: "hostapd.conf.j2"
         dest: "/etc/hostapd/hostapd.conf"
         mode: '0644'
 
     - name: Copy hostapd set_hostapd_iface config script
-      template:
+      ansible.builtin.template:
         src: "set_hostapd_iface.py"
         dest: "/usr/local/bin/set_hostapd_iface.py"
-        mode: '0755'
+        mode: '0744'
 
-    - name: Copy hostapd set_hostapd_iface service file
-      template:
+    - name: Template hostapd set_hostapd_iface service file
+      ansible.builtin.template:
         src: "set-hostapd-iface.service.j2"
         dest: "/lib/systemd/system/set-hostapd-iface.service"
-        mode: '0755'
+        mode: '0644'
 
-    - name: Download hostapd raspapd systemd service file
-      get_url:
-        url: "{{ config_base_url }}/raspapd.service"
+    - name: Template hostapd raspapd systemd service file
+      ansible.builtin.template:
+        src: "templates/raspapd.service.j2"
         dest: "/lib/systemd/system/raspapd.service"
         owner: root
         group: root
         mode: '0644'
 
     - name: Enable service raspapd, avahi-daemon, and set_hostapd_iface by symlink
-      file:
+      ansible.builtin.file:
         src: "/lib/systemd/system/{{ item }}"
         dest: "/etc/systemd/system/multi-user.target.wants/{{ item }}"
         state: link
@@ -82,20 +87,17 @@
         - "set-hostapd-iface.service"
         - "avahi-daemon.service"
 
+    - name: Disable service raspapd restapi service
+      ansible.builtin.file:
+        path: "/etc/systemd/system/multi-user.target.wants/{{ item }}"
+        state: absent
+      with_items:
+        - "restapi.service"
+
     - name: Copy dnsmasq config
-      template:
+      ansible.builtin.template:
         src: "butterbox-dnsmasq.conf.j2"
         dest: /etc/dnsmasq.d/butterbox-dnsmasq.conf
         owner: root
         group: root
         mode: '0644'
-
-    - name: Restart service raspapd, issue daemon-reload to pick up config changes
-      ansible.builtin.systemd_service:
-        state: restarted
-        daemon_reload: true
-        name: "{{ item }}"
-      when: not (is_vmdb2 | bool)
-      with_items:
-        - raspapd
-        - set-hostapd-iface
diff --git a/ansible/install-usb-viewer.yml b/ansible/install-usb-viewer.yml
index 8f84caa..9144fca 100644
--- a/ansible/install-usb-viewer.yml
+++ b/ansible/install-usb-viewer.yml
@@ -4,51 +4,31 @@
   become: true
   tasks:
     - name: Copy systemd services
-      copy:
-        src: "{{ vmdb2_config_base_dir }}/{{ item }}"
+      ansible.builtin.template:
+        src: "{{ item }}"
         dest: "/etc/systemd/system/{{ item }}"
+        mode: '0644'
       loop:
         - udisks2-mount@.service
         - serve-usb@.service
 
     - name: Enable services by symlink
-      file:
-        src: "/etc/systemd/system/{{ item  }}"
+      ansible.builtin.file:
+        src: "/etc/systemd/system/{{ item }}"
         dest: "/etc/systemd/system/multi-user.target.wants/{{ item }}"
         state: link
       loop:
         - udisks2-mount@.service
         - serve-usb@.service
 
-    - name: Copy web UI assets (remote to remote)
-      copy:
-        src: "/var/www/html/assets/{{ item.src }}"
-        dest: "/var/www/html/{{ item.dest }}"
-        remote_src: true
-      loop:
-        - { src: "css/butter-dir-listing.css", dest: "butter-dir-listing.css" }
-        - { src: "js/butter-dir-listing.js", dest: "butter-dir-listing.js" }
-
-    - name: Install Lighttpd USB config
-      copy:
-        src: "{{ vmdb2_config_base_dir }}/50-usb-butter.conf"
-        dest: "/etc/lighttpd/conf-available/50-usb-butter.conf"
-
     - name: Install udev rule
-      copy:
+      ansible.builtin.copy:
         src: "templates/99-usb-butter.rules"
         dest: "/etc/udev/rules.d/99-usb-butter.rules"
+        mode: '0644'
 
     - name: Install udev trigger script
-      copy:
-        src: "{{ vmdb2_script_base_dir }}/on-usb-drive-mounted.sh"
+      ansible.builtin.template:
+        src: templates/on-usb-drive-mounted.sh.j2
         dest: /usr/bin/on-usb-drive-mounted.sh
-        mode: '0755'
-
-    - name: Reload udev rules
-      command: udevadm control --reload-rules
-      when: not (is_vmdb2 | bool)
-
-    - name: Reload systemd daemon
-      command: systemctl daemon-reload
-      when: not (is_vmdb2 | bool)
+        mode: '0744'
diff --git a/ansible/main.yml b/ansible/main.yml
index 7687838..4469f2a 100644
--- a/ansible/main.yml
+++ b/ansible/main.yml
@@ -4,15 +4,15 @@
     - "base"
     - "ap"
     - "matrix"
-- import_playbook: delta-chat.yml
-  tags: "delta-chat"
 - import_playbook: install-rasp-ap.yml
   tags: "ap"
   when:  ap_mode_supported | bool
-- import_playbook: deploy-butter-site.yml
+- import_playbook: deploy-butter-portal.yml
   tags: 
     - "website"
     - "usb"
+- import_playbook: delta-chat.yml
+  tags: "delta-chat"
 - import_playbook: install-chat.yml
   tags: "matrix"
 - import_playbook: cleanup.yml
diff --git a/ansible/remove-wifi-creds.yml b/ansible/remove-wifi-creds.yml
index 20acf08..e3184ab 100644
--- a/ansible/remove-wifi-creds.yml
+++ b/ansible/remove-wifi-creds.yml
@@ -4,8 +4,8 @@
   become: true
   tasks:
     - name: Copy wpa_supplicant config
-      copy:
-        src: "{{ vmdb2_config_base_dir }}/wpa_supplicant.conf"
+      ansible.builtin.template:
+        src: "wpa_supplicant.conf"
         dest: /etc/wpa_supplicant/wpa_supplicant.conf
         force: true
         mode: '0644'
diff --git a/ansible/templates/99-usb-butter.rules b/ansible/templates/99-usb-butter.rules
index 4f378a1..d9334c0 100644
--- a/ansible/templates/99-usb-butter.rules
+++ b/ansible/templates/99-usb-butter.rules
@@ -1,7 +1,7 @@
 # Using udev to mount newly attached usb drives doesn't work.
 # https://unix.stackexchange.com/a/507150/223286
 # So, we depend on udisks to mount the disk.  *Then* we want to
-# to setup the symlink and lighttpd config with our script.
+# to setup the symlink.
 # We can run the script immediately because it waits for the disk
 # to be mounted.
 
diff --git a/ansible/templates/butterbox-dendrite.conf.j2 b/ansible/templates/butterbox-dendrite.conf.j2
new file mode 100644
index 0000000..c7507a3
--- /dev/null
+++ b/ansible/templates/butterbox-dendrite.conf.j2
@@ -0,0 +1,380 @@
+# This is the Dendrite configuration file.
+#
+# The configuration is split up into sections - each Dendrite component has a
+# configuration section, in addition to the "global" section which applies to
+# all components.
+#
+# At a minimum, to get started, you will need to update the settings in the
+# "global" section for your deployment, and you will need to check that the
+# database "connection_string" line in each component section is correct.
+#
+# Each component with a "database" section can accept the following formats
+# for "connection_string":
+#   SQLite:     file:filename.db
+#               file:///path/to/filename.db
+#   PostgreSQL: postgresql://user:pass@hostname/database?params=...
+#
+# SQLite is embedded into Dendrite and therefore no further prerequisites are
+# needed for the database when using SQLite mode. However, performance with
+# PostgreSQL is significantly better and recommended for multi-user deployments.
+# SQLite is typically around 20-30% slower than PostgreSQL when tested with a
+# small number of users and likely will perform worse still with a higher volume
+# of users.
+#
+# The "max_open_conns" and "max_idle_conns" settings configure the maximum
+# number of open/idle database connections. The value 0 will use the database
+# engine default, and a negative value will use unlimited connections. The
+# "conn_max_lifetime" option controls the maximum length of time a database
+# connection can be idle in seconds - a negative value is unlimited.
+
+# The version of the configuration file.
+version: 2
+
+# Global Matrix configuration. This configuration applies to all components.
+global:
+  # The domain name of this homeserver.
+  server_name: {{ butter_name }}.local
+
+  # The path to the signing private key file, used to sign requests and events.
+  # Note that this is NOT the same private key as used for TLS! To generate a
+  # signing key, use "./bin/generate-keys --private-key matrix_key.pem".
+  private_key: /home/{{ butter_user }}/dendrite/matrix_key.pem
+
+  # The paths and expiry timestamps (as a UNIX timestamp in millisecond precision)
+  # to old signing private keys that were formerly in use on this domain. These
+  # keys will not be used for federation request or event signing, but will be
+  # provided to any other homeserver that asks when trying to verify old events.
+  # old_private_keys:
+  # - private_key: old_matrix_key.pem
+  #   expired_at: 1601024554498
+
+  # How long a remote server can cache our server signing key before requesting it
+  # again. Increasing this number will reduce the number of requests made by other
+  # servers for our key but increases the period that a compromised key will be
+  # considered valid by other homeservers.
+  key_validity_period: 168h0m0s
+
+  # The server name to delegate server-server communications to, with optional port
+  # e.g. localhost:443
+  well_known_server_name: ""
+
+  # Lists of domains that the server will trust as identity servers to verify third
+  # party identifiers such as phone numbers and email addresses.
+  trusted_third_party_id_servers:
+    - matrix.org
+    - vector.im
+
+  # Disables federation. Dendrite will not be able to make any outbound HTTP requests
+  # to other servers and the federation API will not be exposed.
+  disable_federation: false
+
+  # Configures the handling of presence events.
+  presence:
+    # Whether inbound presence events are allowed, e.g. receiving presence events from other servers
+    enable_inbound: false
+    # Whether outbound presence events are allowed, e.g. sending presence events to other servers
+    enable_outbound: false
+
+  # Server notices allows server admins to send messages to all users.
+  server_notices:
+    enabled: false
+    # The server localpart to be used when sending notices, ensure this is not yet taken
+    local_part: "_server"
+    # The displayname to be used when sending notices
+    display_name: "Server alerts"
+    # The mxid of the avatar to use
+    avatar_url: ""
+    # The roomname to be used when creating messages
+    room_name: "Server Alerts"
+
+  # Configuration for NATS JetStream
+  jetstream:
+    # A list of NATS Server addresses to connect to. If none are specified, an
+    # internal NATS server will be started automatically when running Dendrite
+    # in monolith mode. It is required to specify the address of at least one
+    # NATS Server node if running in polylith mode.
+    addresses:
+    # - localhost:4222
+
+    # Keep all NATS streams in memory, rather than persisting it to the storage
+    # path below. This option is present primarily for integration testing and
+    # should not be used on a real world Dendrite deployment.
+    in_memory: false
+
+    # Persistent directory to store JetStream streams in. This directory
+    # should be preserved across Dendrite restarts.
+    storage_path: /home/{{ butter_user }}/dendrite/jetstream
+
+    # The prefix to use for stream names for this homeserver - really only
+    # useful if running more than one Dendrite on the same NATS deployment.
+    topic_prefix: Dendrite
+
+  # Configuration for Prometheus metric collection.
+  metrics:
+    # Whether or not Prometheus metrics are enabled.
+    enabled: false
+
+    # HTTP basic authentication to protect access to monitoring.
+    basic_auth:
+      username: metrics
+      password: metrics
+
+  # DNS cache options. The DNS cache may reduce the load on DNS servers
+  # if there is no local caching resolver available for use.
+  dns_cache:
+    # Whether or not the DNS cache is enabled.
+    enabled: false
+
+    # Maximum number of entries to hold in the DNS cache, and
+    # for how long those items should be considered valid in seconds.
+    cache_size: 256
+    cache_lifetime: "5m" # 5minutes; see https://pkg.go.dev/time@master#ParseDuration for more
+
+# Configuration for the Appservice API.
+app_service_api:
+  internal_api:
+    listen: http://localhost:7777 # Only used in polylith deployments
+    connect: http://localhost:7777 # Only used in polylith deployments
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/appservice.db
+    max_open_conns: 10
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+  # Disable the validation of TLS certificates of appservices. This is
+  # not recommended in production since it may allow appservice traffic
+  # to be sent to an unverified endpoint.
+  disable_tls_validation: false
+
+  # Appservice configuration files to load into this homeserver.
+  config_files: []
+
+# Configuration for the Client API.
+client_api:
+  internal_api:
+    listen: http://localhost:7771 # Only used in polylith deployments
+    connect: http://localhost:7771 # Only used in polylith deployments
+  external_api:
+    listen: http://[::]:8071
+
+  # Prevents new users from being able to register on this homeserver, except when
+  # using the registration shared secret below.
+  registration_disabled: false
+
+  # Prevents new guest accounts from being created. Guest registration is also
+  # disabled implicitly by setting 'registration_disabled' above.
+  guests_disabled: true
+
+  # If set, allows registration by anyone who knows the shared secret, regardless of
+  # whether registration is otherwise disabled.
+  registration_shared_secret: ""
+
+  # Whether to require reCAPTCHA for registration.
+  enable_registration_captcha: false
+
+  # Settings for ReCAPTCHA.
+  recaptcha_public_key: ""
+  recaptcha_private_key: ""
+  recaptcha_bypass_secret: ""
+  recaptcha_siteverify_api: ""
+
+  # TURN server information that this homeserver should send to clients.
+  turn:
+    turn_user_lifetime: ""
+    turn_uris: []
+    turn_shared_secret: ""
+    turn_username: ""
+    turn_password: ""
+
+  # Settings for rate-limited endpoints. Rate limiting will kick in after the
+  # threshold number of "slots" have been taken by requests from a specific
+  # host. Each "slot" will be released after the cooloff time in milliseconds.
+  rate_limiting:
+    enabled: true
+    threshold: 5
+    cooloff_ms: 500
+
+# Configuration for the Federation API.
+federation_api:
+  internal_api:
+    listen: http://localhost:7772 # Only used in polylith deployments
+    connect: http://localhost:7772 # Only used in polylith deployments
+  external_api:
+    listen: http://[::]:8072
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/federationapi.db
+    max_open_conns: 10
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+  # How many times we will try to resend a failed transaction to a specific server. The
+  # backoff is 2**x seconds, so 1 = 2 seconds, 2 = 4 seconds, 3 = 8 seconds etc.
+  send_max_retries: 16
+
+  # Disable the validation of TLS certificates of remote federated homeservers. Do not
+  # enable this option in production as it presents a security risk!
+  disable_tls_validation: false
+
+  # Perspective keyservers to use as a backup when direct key fetches fail. This may
+  # be required to satisfy key requests for servers that are no longer online when
+  # joining some rooms.
+  key_perspectives:
+    - server_name: matrix.org
+      keys:
+        - key_id: ed25519:auto
+          public_key: Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw
+        - key_id: ed25519:a_RXGa
+          public_key: l8Hft5qXKn1vfHrg3p4+W8gELQVo8N13JkluMfmn2sQ
+
+  # This option will control whether Dendrite will prefer to look up keys directly
+  # or whether it should try perspective servers first, using direct fetches as a
+  # last resort.
+  prefer_direct_fetch: false
+
+# Configuration for the Key Server (for end-to-end encryption).
+key_server:
+  internal_api:
+    listen: http://localhost:7779 # Only used in polylith deployments
+    connect: http://localhost:7779 # Only used in polylith deployments
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/keyserver.db
+    max_open_conns: 10
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+# Configuration for the Media API.
+media_api:
+  internal_api:
+    listen: http://localhost:7774 # Only used in polylith deployments
+    connect: http://localhost:7774 # Only used in polylith deployments
+  external_api:
+    listen: http://[::]:8074
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/mediaapi.db
+    max_open_conns: 5
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+  # Storage path for uploaded media. May be relative or absolute.
+  base_path: /home/{{ butter_user }}/dendrite/media_store
+
+  # The maximum allowed file size (in bytes) for media uploads to this homeserver
+  # (0 = unlimited). If using a reverse proxy, ensure it allows requests at
+  # least this large (e.g. client_max_body_size in nginx.)
+  # 1GB = 1 048 576 000 (1024*1024*1000)
+  max_file_size_bytes: 1048576000
+
+  # Whether to dynamically generate thumbnails if needed.
+  dynamic_thumbnails: true
+
+  # The maximum number of simultaneous thumbnail generators to run.
+  max_thumbnail_generators: 10
+
+  # A list of thumbnail sizes to be generated for media content.
+  thumbnail_sizes:
+    - width: 32
+      height: 32
+      method: crop
+    - width: 96
+      height: 96
+      method: crop
+    - width: 640
+      height: 480
+      method: scale
+
+# Configuration for experimental MSC's
+mscs:
+  # A list of enabled MSC's
+  # Currently valid values are:
+  # - msc2836    (Threading, see https://github.com/matrix-org/matrix-doc/pull/2836)
+  # - msc2946    (Spaces Summary, see https://github.com/matrix-org/matrix-doc/pull/2946)
+  mscs: []
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/mscs.db
+    max_open_conns: 5
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+# Configuration for the Room Server.
+room_server:
+  internal_api:
+    listen: http://localhost:7770 # Only used in polylith deployments
+    connect: http://localhost:7770 # Only used in polylith deployments
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/roomserver.db
+    max_open_conns: 10
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+# Configuration for the Sync API.
+sync_api:
+  internal_api:
+    listen: http://localhost:7773 # Only used in polylith deployments
+    connect: http://localhost:7773 # Only used in polylith deployments
+  external_api:
+    listen: http://[::]:8073
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/syncapi.db
+    max_open_conns: 10
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+  # This option controls which HTTP header to inspect to find the real remote IP
+  # address of the client. This is likely required if Dendrite is running behind
+  # a reverse proxy server.
+  # real_ip_header: X-Real-IP
+
+# Configuration for the User API.
+user_api:
+  # The cost when hashing passwords on registration/login. Default: 10. Min: 4, Max: 31
+  # See https://pkg.go.dev/golang.org/x/crypto/bcrypt for more information.
+  # Setting this lower makes registration/login consume less CPU resources at the cost of security
+  # should the database be compromised. Setting this higher makes registration/login consume more
+  # CPU resources but makes it harder to brute force password hashes.
+  # This value can be low if performing tests or on embedded Dendrite instances (e.g WASM builds)
+  # bcrypt_cost: 10
+  internal_api:
+    listen: http://localhost:7781 # Only used in polylith deployments
+    connect: http://localhost:7781 # Only used in polylith deployments
+  account_database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/userapi_accounts.db
+    max_open_conns: 10
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+  # The length of time that a token issued for a relying party from
+  # /_matrix/client/r0/user/{userId}/openid/request_token endpoint
+  # is considered to be valid in milliseconds.
+  # The default lifetime is 3600000ms (60 minutes).
+  # openid_token_lifetime_ms: 3600000
+
+# Configuration for Opentracing.
+# See https://github.com/matrix-org/dendrite/tree/master/docs/tracing for information on
+# how this works and how to set it up.
+tracing:
+  enabled: false
+  jaeger:
+    serviceName: ""
+    disabled: false
+    rpc_metrics: false
+    tags: []
+    sampler: null
+    reporter: null
+    headers: null
+    baggage_restrictions: null
+    throttler: null
+
+# Logging configuration
+logging:
+  - type: std
+    level: info
+  - type: file
+    # The logging level, must be one of debug, info, warn, error, fatal, panic.
+    level: info
+    params:
+      path: /var/log/dendrite/
+
+
+# Not part of the dendrite-sample file, but required by 0.13.7
+relay_api:
+  database:
+    connection_string: file:///home/{{ butter_user }}/dendrite/relay_api.db
diff --git a/ansible/templates/butterbox-dendrite.service.j2 b/ansible/templates/butterbox-dendrite.service.j2
new file mode 100644
index 0000000..63a8b5c
--- /dev/null
+++ b/ansible/templates/butterbox-dendrite.service.j2
@@ -0,0 +1,14 @@
+[Unit]
+Description=Dendrite Service
+After=network.target
+StartLimitIntervalSec=0
+
+[Service]
+Type=simple
+Restart=always
+RestartSec=1
+User={{ butter_user }}
+ExecStart=/home/{{ butter_user }}/dendrite/bin/dendrite --config /home/{{ butter_user }}/dendrite/butterbox-dendrite.conf -really-enable-open-registration
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ansible/templates/butterbox-dnsmasq.conf.j2 b/ansible/templates/butterbox-dnsmasq.conf.j2
index 2a11557..b0f64a0 100644
--- a/ansible/templates/butterbox-dnsmasq.conf.j2
+++ b/ansible/templates/butterbox-dnsmasq.conf.j2
@@ -1,4 +1,4 @@
 interface=wlan0
 dhcp-range=10.3.141.50,10.3.141.255,255.255.255.0,12h
 dhcp-option=6,10.3.141.1
-address=/{{ butter_name }}.lan/10.3.141.1
+address=/{{ butter_name }}.local/10.3.141.1
diff --git a/ansible/templates/butterbox-portal.service.j2 b/ansible/templates/butterbox-portal.service.j2
new file mode 100644
index 0000000..4bb8cfa
--- /dev/null
+++ b/ansible/templates/butterbox-portal.service.j2
@@ -0,0 +1,14 @@
+[Unit]
+Description=Portal Service
+After=network.target
+StartLimitIntervalSec=0
+
+[Service]
+Type=simple
+Restart=always
+RestartSec=1
+User={{ butter_user }}
+ExecStart=/bin/bash -c 'source /home/{{ butter_user }}/portal_env/bin/activate && cd /home/{{ butter_user }}/butter-portal && flask --app butter-portal.py run'
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ansible/templates/change-manager.service.j2 b/ansible/templates/change-manager.service.j2
new file mode 100644
index 0000000..9fbc53e
--- /dev/null
+++ b/ansible/templates/change-manager.service.j2
@@ -0,0 +1,15 @@
+[Unit]
+Description=Butterbox setting management service
+After=network.target
+StartLimitIntervalSec=0
+
+[Service]
+Type=simple
+Restart=on-failure
+RestartSec=1
+User=root
+ExecStart=/bin/bash -c "chmod 600 /etc/ssh/*key && python3 change_manager.py"
+WorkingDirectory=/home/{{ butter_user }}/butter-portal
+Environment=PYTHONUNBUFFERED=1
+[Install]
+WantedBy=multi-user.target
diff --git a/ansible/templates/hostapd.conf.j2 b/ansible/templates/hostapd.conf.j2
index 1f8b8e4..9e197c1 100644
--- a/ansible/templates/hostapd.conf.j2
+++ b/ansible/templates/hostapd.conf.j2
@@ -7,7 +7,7 @@ beacon_int=100
 ssid={{ butter_name }}
 channel=1
 hw_mode=g
-ieee80211n=0
+ieee80211ac=1
 interface=wlan0
 wpa=none
 wpa_pairwise=CCMP
diff --git a/ansible/templates/keanu-weblite-config.json.j2 b/ansible/templates/keanu-weblite-config.json.j2
new file mode 100644
index 0000000..27908bd
--- /dev/null
+++ b/ansible/templates/keanu-weblite-config.json.j2
@@ -0,0 +1,10 @@
+{
+    "appName": "Keanu on Butter Box",
+    "appNames": {},
+    "productLink": "{{ butter_name }}.local",
+    "defaultServer": "http://{{ butter_name }}.local",
+    "rtl": false,
+    "analytics": {
+        "enabled": false
+    }
+}
diff --git a/ansible/templates/nginx-config.j2 b/ansible/templates/nginx-config.j2
new file mode 100644
index 0000000..262ac5e
--- /dev/null
+++ b/ansible/templates/nginx-config.j2
@@ -0,0 +1,22 @@
+server {
+        listen 80 default_server;
+        listen [::]:80 default_server;
+        server_name {{ butter_name }}.local;
+
+        location ^~ /chat {
+                           alias /var/www/html/chat;
+                          }
+
+        location ^~ /raspap {
+                           proxy_pass http://127.0.0.1:8080;
+                          }
+
+        location ^~ /_matrix {
+                           proxy_pass http://127.0.0.1:8008;
+                          }
+
+        location / {
+                    proxy_pass http://127.0.0.1:5000;
+                   }
+
+        }
diff --git a/ansible/templates/on-usb-drive-mounted.sh.j2 b/ansible/templates/on-usb-drive-mounted.sh.j2
new file mode 100644
index 0000000..ad456d6
--- /dev/null
+++ b/ansible/templates/on-usb-drive-mounted.sh.j2
@@ -0,0 +1,48 @@
+#!/bin/bash
+
+# Run by udev when a USB drive is inserted
+# usage: /usr/bin/on-usb-drive-mounted.sh /media/%k
+
+# If the drive inserted contains a directory named "butter",
+# symlink it to /media/usb-butter
+device="$1"
+
+# The device might not be mounted yet, so wait for it.
+usb_mount_path=""
+for ((i=0; i<10; i++)); do
+    usb_mount_path=$(findmnt -n -o TARGET --source "$device")
+    if [ -n "$usb_mount_path" ]; then
+        break
+    fi
+    sleep 1
+done
+
+# findmnt will briefly return 1, so don't set e until we're done with it.
+set -e
+
+if [ -z "$usb_mount_path" ]; then
+    echo "Device $device is not mounted"
+    exit 1
+else
+    echo "Device $device mounted to: $usb_mount_path"
+fi
+
+butter_dir="$usb_mount_path"
+served_dir="/media/usb-butter"
+
+# make directory butter_dir world readable
+sudo chmod -R a+rx "$butter_dir"
+sudo chmod -R a+rx "/media/root/"
+
+if [ -d "$butter_dir" ]; then
+    # Delete served_dir if it exists
+    if [ -L "$served_dir" ]; then
+        sudo rm "$served_dir"
+    fi
+    echo "Linking $butter_dir to $served_dir"
+    ln -sf "$butter_dir" "$served_dir"
+    sudo chown -R {{ butter_user }}:{{ butter_user }} $served_dir
+else
+    echo "No butter directory $butter_dir found on $device"
+    exit 1
+fi
diff --git a/ansible/templates/raspapd.service.j2 b/ansible/templates/raspapd.service.j2
new file mode 100644
index 0000000..773a13e
--- /dev/null
+++ b/ansible/templates/raspapd.service.j2
@@ -0,0 +1,15 @@
+[Unit]
+Description=RaspAP Service Daemon
+DefaultDependencies=no
+# This line, which the default raspapd.service would use, results in a circular dependency
+# And the symptom we see is that it doesn't boot.  Instead, run this after network.target
+# After=multi-user.target
+After=network.target
+
+[Service]
+Type=oneshot
+ExecStart=/bin/bash /etc/raspap/hostapd/servicestart.sh --interface uap0 --seconds 3
+RemainAfterExit=no
+
+[Install]
+WantedBy=multi-user.target
diff --git a/ansible/templates/serve-usb@.service b/ansible/templates/serve-usb@.service
new file mode 100644
index 0000000..4081b72
--- /dev/null
+++ b/ansible/templates/serve-usb@.service
@@ -0,0 +1,8 @@
+[Unit]
+Description=Serve USB content
+BindTo=dev-%i.device
+
+[Service]
+ExecStart=/bin/sh -c '/usr/bin/on-usb-drive-mounted.sh /dev/%i'
+ExecStop=/bin/sh -c 'rm /media/usb-butter/'
+RemainAfterExit=yes
\ No newline at end of file
diff --git a/ansible/templates/udisks2-mount@.service b/ansible/templates/udisks2-mount@.service
new file mode 100644
index 0000000..c87a591
--- /dev/null
+++ b/ansible/templates/udisks2-mount@.service
@@ -0,0 +1,8 @@
+[Unit]
+Description=Mount service
+BindTo=dev-%i.device
+
+[Service]
+ExecStart=/bin/sh -c '/usr/bin/udisksctl mount -b /dev/%i'
+ExecStop=/bin/sh -c '/usr/bin/udisksctl unmount -b /dev/%i'
+RemainAfterExit=yes
\ No newline at end of file
diff --git a/ansible/templates/wpa_supplicant.conf b/ansible/templates/wpa_supplicant.conf
new file mode 100644
index 0000000..5622f2e
--- /dev/null
+++ b/ansible/templates/wpa_supplicant.conf
@@ -0,0 +1,3 @@
+country=US
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
+ap_scan=1
diff --git a/debian.md b/debian.md
new file mode 100644
index 0000000..7d8bb6f
--- /dev/null
+++ b/debian.md
@@ -0,0 +1,57 @@
+# Creating an upgrade content pack for the butterbox
+
+Butterboxes run [Debian OS](https://www.debian.org/) and can be upgraded using `apt update` and `apt upgrade` commands.
+However, since they are often expected to operate in areas without Internet connectivity,
+the following instructions detail how to create and use a content pack to allow local offline upgrades.
+
+## Requirements
+- A large (min 250GB ) Hard drive or USB Stick, formatted as FAT32 or ext4
+- Internet connectivity
+- A computer running Debian
+
+## Creating a Debian mirror
+
+- Plug in and mount the hard drive into a computer running Debian. The rest of the configuration assumes this is mounted at `/mnt`.
+- Edit the Debian mirror configuration. For this, depending on what kind of butterbox you have (AMD64-based, like an old laptop, or 
+ARM-based, like a Raspberry Pi), edit the file "/etc/apt/mirror.list" (you may wish to back it up beforehand) 
+to contain the following, making sure to uncomment the line corresponding to your box. 
+```angular2html
+############# config ##################
+#
+ set base_path    /mnt # This is where the mirror will be created, ensure it corresponds to where the hard drive is mounted
+#
+ set mirror_path  $base_path/mirror
+ set skel_path    $base_path/skel
+ set var_path     $base_path/var
+ set cleanscript $var_path/clean.sh
+ set postmirror_script $var_path/postmirror.sh
+ set run_postmirror 0
+set nthreads     20
+set _tilde 0
+#
+############# end config ##############
+
+#deb [arch=arm64] http://ftp.us.debian.org/debian stable main contrib non-free # Uncomment for ARM64, e.g. Raspberry Pi 3 or 4
+#deb [arch=amd64] http://ftp.us.debian.org/debian stable main contrib non-free # Uncomment for AMD64
+
+# Note the mirror location, ftp.us.debian.org; you can choose any other online debian mirror to download from, keep a note of its name
+```
+
+- Run the command `apt-mirror`. This will create a Debian mirror on your hard drive, that can then be used to upgrade your butterbox.
+The size of the archive varies, but will utilise somewhere in the region of 150-200GB, depending on architecture.
+
+
+> Careful running this command on any metered connection, as it will attempt download hundreds of GB worth of data!
+
+> Be patient. This command will take a while to run depending on the speed of your Internet connection.
+
+## Updating your Butterbox
+
+- Plug in the hard drive into your butterbox, and mount it. This assumes it is mounted at `/mnt`.
+- Log in via the butterbox console, as the root user.
+- ensure the date is set correctly by running date, for example: `date -s "30/12/2026 10:29"`
+- edit file `/etc/apt/sources.list` to contain the following line: 
+` deb file:/mnt/mirror/ftp.us.debian.org/debian stable main contrib non-free`
+
+Note that the name of the directory might vary depending on the mirror you used in the previous step.
+- Congrats! Now you can run `apt update` and `apt upgrade` to update the box.
\ No newline at end of file
diff --git a/vmdb2-recipes/amd64_trixie.yaml b/vmdb2-recipes/amd64_trixie.yaml
index d5e15ac..65b186e 100644
--- a/vmdb2-recipes/amd64_trixie.yaml
+++ b/vmdb2-recipes/amd64_trixie.yaml
@@ -95,6 +95,9 @@ steps:
       - wget
       - dhcpcd
       - python3
+      - python3-packaging
+      - python3-virtualenv
+      - nginx
       - lighttpd
       - unzip
       - sudo
@@ -110,6 +113,7 @@ steps:
       - init-system-helpers 
       - syslinux
       - linux-image-amd64
+      - git
     tag: tag-root
     unless: rootfs_unpacked
 
@@ -117,6 +121,7 @@ steps:
     unless: rootfs_unpacked
 
   - shell: |
+
       echo "butterbox" > "${ROOT?}/etc/hostname"
 
       # Allow root logins locally with no password
@@ -146,6 +151,10 @@ steps:
     
   - shell: |
       rm "${ROOT?}/etc/resolv.conf"
+      mkdir -p "${ROOT?}/etc/systemd/system/multi-user.target.requires/"
+      install -m 644 -o root -g root image-specs/rootfs/etc/systemd/system/rpi-generate-ssh-host-keys.service "${ROOT?}/etc/systemd/system/"
+      ln -s "${ROOT?}/etc/systemd/system/rpi-generate-ssh-host-keys.service" "${ROOT?}/etc/systemd/system/multi-user.target.requires/rpi-generate-ssh-host-keys.service"
+      rm -f "${ROOT?}"/etc/ssh/ssh_host_*_key*
     root-fs: tag-root
 
   # Clear /etc/machine-id and /var/lib/dbus/machine-id, as both should
@@ -159,13 +168,14 @@ steps:
   # Note this will also trigger ConditionFirstBoot=yes for systemd.
   # On Buster, /etc/machine-id should be an emtpy file, not an absent file
   # On Bullseye, /etc/machine-id should not exist in an image
+  #
+
   - chroot: tag-root
     shell: |
       rm -f /etc/machine-id /var/lib/dbus/machine-id
       echo "uninitialized" > /etc/machine-id
       echo "LABEL=BOOT / ext4 rw 0 1" > /etc/fstab
 
-
   - virtual-filesystems: tag-root
 
   - ansible: tag-root
@@ -174,6 +184,6 @@ steps:
     extra_vars: 
       butter_language: en
       butter_name: butterbox
-      tags: base,usb,matrix,keanu,website
+      tags: delta-chat,ap,base,usb,matrix,keanu,website
       butter_user: "amd"
       ap_mode_supported: "false"
diff --git a/vmdb2-recipes/raspi_4_trixie.yaml b/vmdb2-recipes/raspi_4_trixie.yaml
index cd9925b..7c2b9ab 100644
--- a/vmdb2-recipes/raspi_4_trixie.yaml
+++ b/vmdb2-recipes/raspi_4_trixie.yaml
@@ -81,7 +81,11 @@ steps:
       - dhcpcd
       - dnsmasq
       - python3
+      - python3-packaging
+      - python3-virtualenv
+      - nginx
       - lighttpd
+      - git
       - unzip
       - sudo
       - systemd-timesyncd
diff --git a/vmdb2-recipes/run_build_raspi4.sh b/vmdb2-recipes/run_build_raspi4.sh
index e0a9a07..f09f05a 100755
--- a/vmdb2-recipes/run_build_raspi4.sh
+++ b/vmdb2-recipes/run_build_raspi4.sh
@@ -4,7 +4,7 @@ GIT_BRANCH=$(git branch --show-current 2>/dev/null)
 GIT_TAG=$(git tag 2>/dev/null | head -n1)
 BUILD_DATE=$(date +"%d%m%y")
 SUFFIX="${GIT_BRANCH}_${GIT_TAG}_${BUILD_DATE}"
-time vmdb2 --rootfs-tarball=raspi4_$SUFFIX.tar.gz --output raspi4_butter_NOAP_$SUFFIX.img --log raspi4_butter_$SUFFIX.log raspi_4_trixie.yaml 
-tar cvfz raspi4_butter_NOAP_$SUFFIX.img.tar.gz raspi4_butter_NOAP_$SUFFIX.img  
+time vmdb2 --rootfs-tarball=raspi4_$SUFFIX.tar.gz --output raspi4_butter_$SUFFIX.img --log raspi4_butter_$SUFFIX.log raspi_4_trixie.yaml 
+tar cvfz raspi4_butter_NOAP_$SUFFIX.img.tar.gz raspi4_butter_$SUFFIX.img  
 #curl -H "Authorization: token" $CHURN_SECRET -X PUT --upload-file raspi4_butter_$SUFFIX.img.tar.gz https://guardianproject.dev/api/packages/butter/generic/churn/latest/raspi4_butter_$SUFFIX.img.tar.gz
 #rm *img *tar.gz